foam stuff for truss poles

[GrahamL]

anyone know what its actully called and where you can get it ?

my poles are 1 " od I believe

many thanks
graham

[Larryp (Laurie)]

If you mean the stuff in spray cans, Bunnings sell it

[pmrid (Peter)]

Originally Posted by nightstalker

anyone know what its actully called and where you can get it ?

my poles are 1 " od I believe

many thanks
graham

Clark Rubber sell foam tubes that you slide/pull on over the aluminium tube. I am not sure how many different diameters they sell but I bought some there a year or so back that would fit a 1" tube. I suggest trying there to begin with.

Peter

[Zubenel (Wes)]

IF you are talking about the Soft foam covering you could use Hot water/aircon pipe lagging??.
http://www.refreshair.com.au/shop/ac...pe-insulation/
Cheers

[GrahamL]

thanks ,clark rubber sounds right ,I hope theres still one around my way , I'll have a look.

cheers

[GrahamL]

thats the stuff Wes thanks , I work at a large site and I spotted a small piece in the dumpster a while back and wondered how it got there .

A plumber or the air con guy !, we have had them doing work often lately.

cheers , hes probably got rolls of the stuff

[mozzie (Peter)]

i bought some at clark rubber,a few different diamaters and thickness..

[stringscope (Ian)]

+1 for Clark Rubber

[barx1963 (Malcolm)]

Mitre 10 has it here.

Malcolm

[astronut (John)]

I have a 12" Lightbridge, originally the truss poles were anodized silver/grey.
I wanted them to be black, so I used heat shrink to cover the poles.

They are easy to handle in the extreme cold, and are cheap to purchase.
Here is a link to the ebay site, where I purchased mine.

[floyd_2 (Dean)]

I've bought it from Bunnings in the past. It was dark grey though, not black.

Dean

[GrahamL]

bunnings do indeed sell 1 metre lengths , for $3.40 each and it is grey

A little hard to find as its so light the tend to shove the boxes up high in the plumbing section.