Sky X camera module and Starlight Express camera

[gregbradley]

I can connect my Starlight Express Trius 694 camera successfully with Sky X. But when I click take a photo it freezes up every time.

When I look in setup I have Trius 694 selected. Suggestions? I am using Version 10.2.0 (current I believe) and build 7398.

Also my FLI filter wheel won't connect at all. When I look up setup it show FLI Filter wheel but when I click on that it goes to a subchoice which says "Connect to a FLI Filter wheel" which then fails.

Any suggestions there as well? I would like to be able to use the Sky X to control my gear if I can. At least try it out.

Greg.

[cfranks (Charles)]

Greg,

You are 10 versions behind with TSX so I would suggest you upgrade to the latest (8114) and try again. It may not help but it gets that possibility out of the way.

Cheers
Charles

[gregbradley]

Originally Posted by cfranks

Greg,

You are 10 versions behind with TSX so I would suggest you upgrade to the latest (8114) and try again. It may not help but it gets that possibility out of the way.

Cheers
Charles

Thanks for that. I did check a week ago and it said that 10.2.0 is still the latest version. You are referring to the latest daily build right?

Nothing to lose I suppose, there is always system restore if its a step backwards.

Greg.

[cfranks (Charles)]

A person can get thoroughly confused with SB's nomenclature but I just keep applying their latest Daily Build although it hasn't been 'Daily' for a long time.

Charles