· Skywatcher EQ6Pro excellent condition, about 4 years old, but really only used for the first two years [bought G11 + AP900]
· Special modified mount adaptor to all easy fine tune levelling, and ability to check and fix with ease. Also allows for rough levelling with tripod legs firmly spread in place. Only adds a small amount of weight to tripod, plates made from aluminium.
· 2x standard weights, a smaller weight for counter weighing a DSLR, and a home made weight for extra payload offset.
· Has both D saddle and Vixen dovetail heads.
· Original hand controller in mint condition Eqmod used
· EQMOD adaptor serial adaptor [just need a Serial to USB adaptor]
· Logitech Rumble Wireless Keypad all mark in contrasting white text for night time use. [you need to download the drivers from Logitech]
· Skywatcher serial update cable to update the firmware of the hand controller [dont know which firmware is on there?]
· 12v power cable [I just made it a little longer]
· Copy Pelican Case to carry and protect the mount head
· Foot pads that provide a broad foot print on soft surfaces. These have a centre dimple to accept the point ends of the tripod legs. These are excellent.
Mount head is in excellent condition, mount tripod shows a small number of transport marks and some small dents, but it is in very good condition.
