A turret from yesteryear, refurbished to allow the more run of the mill eyepieces to work.
Zeiss prism turret, with male M44 fitting on the scope side, and three eyepiece holders with 1.25" fittings. In the fourth fitting is the female M44 thread, for "normal" Zeiss eyepieces.
So, with your Zeiss scope use the H-40 and three other 1.25" eyepieces, or the Zeiss .96" with adaptors (not included). Turret will screw straight onto the M44 end of the scope.
OK, I hear you ask, what about my "non-Zeiss" scope.
I also have the required fittings to fit this turret to any 2" focuser draw-tube. In addition the female M44 opening is able to accept the Baader Click-Lock 1.25" fitting, so we have all bases covered.
Quality, and finish, superb engineering.
Glass looks very nice, exterior cosmetics of the turret proper shows slight use. All the E/P and scope attachment fittings are new, I had plans for this but sold the scopes that it was to go on, and have only newts now, so little use to me.
Picture shows a slight scuff, and one screw missing. I am endeavouring to locate one, but consider it as is, without this screw.
$495 posted, PayPal.
