|
Allowing Maxim to control all scope
Hi All,
I would like to get Maxim to control my Meade RCX 400 10", to guide it has a Celestron 700mm X 60mm and SX Lodestar
at present guiding thou PHD and autoguider port ST4 on scope, main imaging camera is SX H9C, all this is run on
2 computers all cameras and scope use USB,one computer runes Meade Autosuite for GOTO and PHD for guiding,
the other runs Maxim 5.12 to image, what I want to do is run it all on one computer which has 3 USB ports,
this is what I have,
Meade rcx 10",
celestron 700mm X 60mm set up on scope,
sx h9c imaging camera,
lodestar guide camera,
I download thees ASCOM drivers,
platform 5 and 5.5,
meade lx 200 gps and r 5.0.0,
POTH 5.0.5,
But what do I do with all this to make it work all together , I have set maxim as suggested in
stargazers lounge guide to guiding with maxim.
peter
Last edited by p1taylor; 13-03-2011 at 12:34 AM.
|
