Sold
I have for sale my QHY8Pro One shot colour CCD.
Comes as a complete kit including QHY8Pro, Front window heater ring, DC201 power regulator and TEC controller, Power supply240V/12V and all cables required all in a foam filled Aluminium case.
The camera was bought new from Gama Electronics in December last year.
Sample images can be seen on my website.
http://www.darkskyau.com
The camera hasn't been used for some time due to the purchase of a mono camera so it must move on.
Specs for the camera:
Temperature controlled and regulated 2 stage TEC with -40 deg C Delta cooling.
Fully Air Sealed and Gas filled Chamber. But CCD sensor is still easily accessible if required.
Lower noise levels overal than QHY-8, due to re-design and placement of Main board and electronics behind CCD chamber.
Uses Sony's ICX-453 Progressive Sensor
High speed 16 bit A/D converter
Uses only 2 cables for operation, Power (10 pin) and the USB cable.
Fully sealed, Argon Gas purged chamber
Total pixels : 3110 x 2030
Active pixels: 3032 x 2016
Pixel Size: 7.8um x 7.8um square
Color method: RGB BAYER film on CCD
Effective sensor area: 28.4 mm diagonal
Readout noise: 6 -10 e @600 Kpixel/s
QE: 60% at Green (Peak) , 50% at Blue and H.a
Microlensing on chip
ICX-453 Progressive Scan Sony CCD Sensor
ABG: -110dB
16bit ADC with CDS and Preamp
USB2.0 High Speed interface
Built in temperature sensor
DC201 with TEC controller/Regulator (Temperature controlled to +/- 0.1 deg C)
Ultra compact size suitable for primary focus imaging, e.g Hyperstar
Weight: 385g
Asking $2000 including post within Australia. Firm Price No offers please.
I can post photos if required but it is as shown on Gamas website. http://www.gamaelectronics.com.au/QHY8_II.html
