HELP :d

[bmitchell82 (Brendan)]

if anybody is out there at the moment i need a dimension for a G11 head mount.

the 3 bolts that join the headmount to the tripod, i need the depth from where the mount head sits on the tripod

im making the adaptor for the pier.

[gbeal]

http://ccdastro.net/takg11.pdf

[jjjnettie (Jeanette)]

Ponders is the man with all the answers.

[bmitchell82 (Brendan)]

.... Paul rang me i asked him 18mm was the answer within 3 seconds....
he then measured it, and said oh, i was wrong its 17 mm... 15 seconds later... nope i was wrong, its 18 mm like i first said

thanks for all that helped.

[[1ponders] (Paul)]

You're welcome Brendan

Originally Posted by jjjnettie

Ponders is the man with all the answers.

I wish. But thank you just the same.

[bmitchell82 (Brendan)]

NP. it all fits perfectly, not to tight, not loose grahame got it home about 30 min ago so all good its a pier in his back yard. 150mm x 150mm box with 5mm walls, 300 x 300mm 12mm thick plate top and bottom and the biggest mother of adapter for the losmandy head. its 25mm thick walls. :S i had to mill it down in the middle. but weighing in at 36kg + the adapter which would be a good 3-4kg its a piece of kit alright