Full SBIG imaging kit for sale.
This is a single-chip unit, as I prefer to guide externally using PHD and my QHY5.
Info:
http://www.company7.com/sbig/products/st8.html
1 x SBIG ST-8i "Titanium" mono (single chip) regulated cooling CCD camera
Imaging Resolution: 1534 x 1020 Pixels, Class II Kodak KAF1600 CCD
Pixel Dimensions: 9 micron square
Array Dimensions: 13.8mm x 9.2mm, 16.3mm Diagonal
Desiccant: Yes, internal & replaceable
Standard Control Software: PC Windows or Win95
Communications Port: Parallel
Analog/Digital Converter: 16 Bit
Digitization Rate, Full Frame: 11.5 secs. at 33 KHz
Shutter: Electro-Mechanical
Fastest Shutter Speed: 0.11 Sec.
Longest Shutter Speed: 1 Hour
Cooling From Ambient: -35 Degrees
This camera is able to be upgraded with water cooling from SBIG for little money.
1 x 5 meter parallel cable
1 x 1.25" nosepiece
1 x 2" nosepiece
1 x CCDSoft Ver. 5 CD with serial number
1 x 115VAC Power Supply
1 x 240VAC-120VAC Stepdown Transformer
1 x IBM A20M ThinkPad laptop with parallel port, 11Gb disk, red screen shield and SBIG/Bisque CCDsoft capture software loaded & ready to run on Windows 2000 (no need to update it and very stable). All drivers up to date. Comes with 240VAC and 12VDC power adapters. Internal battery is dead, but new ones cheap though via eBay, but I usually have it plugged in to either 240V along with the rest or via a 12VDC adapter and it's fine with that.
TOTAL PRICE: AU$1,250 plus shipping from Sydney. Works beautifully. Fan recently replaced.
Images are low-resolution for web use here.
