SynScan Hand Control Ver 3 -
13,740 object data base.
Connect to a computer via a serial cable.
Commercially available planetarium softwares can be used to control the HEQ5 mount.
The new Version 3 software can also be upgraded via the internet.
Specifications:
* PC compatibility.
* Mount Type: German Equatorial Mount
* Telescope Mounting Method: Tube Rings (not supplied)
* Telescope Control: SynScan Hand Control
* Tripod: 1.75" Diameter Stainless Steel Pipe
* Tripod Hight: 97-121cm
* Tripod Weight: 5.6kgs
* Counterweight: 1 X 5.1kgs
* Mount Weight (without counterweight): 10Kgs
* Mount Height: 35cm
* Total weight: 15kgs (counterweights not included)
* Motor Type: Microstep driven 1.8 degree stepper motors
* Power Supply: Requires 11 to 15 V DC 2Amp (Tip positive)- not supplied.
* Recommended maximum loading rate: approx. 13.5kg
* Accessory Tray
* SynScan Hand Control V3 upgradable.
Technical stuff:
* Positioning Accuracy up to 1 arc minute. Accuracy enhanced by software collimation error (mount mechanical error) compensation.
* Stepper motors with 1.8° step angle and 64 micro steps driven.
* Slewing speed up to 3.4°/sec (800X).
* Auto Guider Interface for astro-photography.
* Guiding speed selectable from 0.25X, 0.50X, 0.75X, or 1X.
* Object database containing complete M, NGC, and IC catalogues.
* Minimal vibration for steady long-exposure photography.