Go Back   IceInSpace > Equipment > DIY Observatories
Register FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Rate Thread
  #1  
Old 21-09-2008, 10:21 AM
Barrykgerdes
Registered User

Barrykgerdes is offline
 
Join Date: Feb 2007
Location: Beaumont Hills NSW
Posts: 2,900
Building an Observatory

Hi Gang

I have been reading through the trials and tribulations of building an Observatory to house a telescope.

A permanent mount is a real asset to spending more time at the eyepiece and it is a simple matter if you put your mind to it.

Don't have grandious ideas about it a simple 2.4 x 2.4 x 180cm (purpose built) "garden shed" size is quite ample for a pedestal mounted 14" SCT and it gets around planning restrictions in all but the worst localities.

When I moved to my new house in Kellyville and being lazy by nature I decided that I needed somewhere permanent for my 10" LX200 to save setting it up every time I wanted to use it. I also wanted protection from the local environment of weather and lighting.

I settled on a shed of the dimensions described and drew up some plans for a suitable shed to mount a (portable ?) Sirius Dome on.

I started by making a formwork of the required size in a corner of the back yard and got my neighbour who was a concretor to lay as slab for the princely sum of $180. This was all done on the first weekend.

During the next week I went to the timber store and ordered the timber and got a good discount when he said he could cut all the pieces to size with heavier scrap than if I had bought what I originally intended. At the same time I ordered enough colourbond sheeting to do the sides also cut to size. I also ordered the Dome from the agents.

Two weeks later I reasoned that the floor had cured enough so I went and collected the timber and sheeting and made up the framework for the shed. The four sides are bolted together at the corners and fastened to the concrete with dyna bolts. This makes for easy removal when the time comes. I fastened the side sheeting and prepared the top to take the dome. I won't go into details because the full description is on my web site.

During the next week I picked up the dome and with the help of my son, assembled it and the two of us had no bother lifting it onto the prepared area. I applied some paint and cleaned up the job and the basic observatory was complete. The whole job was about three weekends work.

I intended to make a good solid pier out of 10" steel pipe filed with sand but so far I have not done this. Instead I pressed into service a tripod I made previously, as a temporary measure that has proved adequate for my use.

The last job was to make a jib crane in one corner that stores along the inside of the shed when not in use. It plumbs the telescope nicely and I can easily lift my now 12" SCT on and off the wedge when required. I can even do this with one hand, an experiment I did when a one armed man wanted to know how to set up a large telescope.
Reply With Quote
  #2  
Old 21-09-2008, 11:29 AM
leon's Avatar
leon
Registered User

leon is offline
 
Join Date: Apr 2006
Location: Warrnambool
Posts: 12,799
Agreed Barry, although my Observatoty is of a different design to yours, it was really very simple to construct and serves the purpose for wich it was intended.

There is nothing more satisfying than building it your self and it all works.

leon
Reply With Quote
  #3  
Old 21-09-2008, 01:51 PM
Terry B's Avatar
Terry B
Country living & viewing

Terry B is offline
 
Join Date: Mar 2006
Location: Armidale
Posts: 2,790
Great work.
I love my roll off roof observatory. I must admit I decided against a dome. I don't like observing through a dome as you can't actually see much of the sky.
Reply With Quote
  #4  
Old 21-09-2008, 05:30 PM
Barrykgerdes
Registered User

Barrykgerdes is offline
 
Join Date: Feb 2007
Location: Beaumont Hills NSW
Posts: 2,900
Quote:
Originally Posted by Terry B View Post
Great work.
I love my roll off roof observatory. I must admit I decided against a dome. I don't like observing through a dome as you can't actually see much of the sky.
Hi Terry

If I lived in an open area I probably would have built a roll off. But living in a built up area I used the dome because it cuts down the area of the sky visible along with street lights and neighbours lights. If you looked at the picture on my web site you will see I am surrounded by two storey houses on small blocks and it also keeps your night vision.

Barry
Reply With Quote
  #5  
Old 27-09-2008, 05:02 PM
bluescope's Avatar
bluescope
I've got a Sirius eye !

bluescope is offline
 
Join Date: Mar 2007
Location: Country W.A.
Posts: 1,587
Quote:
Originally Posted by Barrykgerdes View Post
Hi Terry

If I lived in an open area I probably would have built a roll off. But living in a built up area I used the dome because it cuts down the area of the sky visible along with street lights and neighbours lights. If you looked at the picture on my web site you will see I am surrounded by two storey houses on small blocks and it also keeps your night vision.

Barry

Hi Barry

I just tried to look at your website and Internet Explorer says couldn't display it for some reason .... any clues ? I'm interested in your observatory construction.



p.s. Just got to it via Google search so no worries, looks good mate !
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 12:19 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement