Vixen GP2 mount SOLD

guodong · #1 03-07-2008, 11:16 AM

New semester begins, I won't have too much spare time.

All these were bought secondhand in the past 3 months, but they are in good condition and used less than 3 times.

1. Vixen GP2 (no polar scope) mount and tripod (very tiny marks on tripod), with original boxes, dual axis drive (not original, but they fit the mount very well).
Asking 680$ +freight. Tripod only: 240$+ freight

2. [Sold] Borg 60ED. 580$ including freight in Aus.
3. [Sold] WO zenith star doublet 66SD. 300$+freight.

Local pick up is preferred.

Cheers,
Gordon

guodong · #2 08-07-2008, 01:25 PM

Prices reduced
Otherwise I'll keep them

guodong · #3 05-08-2008, 09:42 PM

Go on, pics renewed.

peeech (Perry) · #4 19-08-2008, 05:19 AM

Hey "Guodong",
New member of this group from the northern hemisphere!!

Would you be interested in shipping the Mini 60ED to the states, specifically SC, zip 29841?

And if so, bottom line total in USD.

Thanks,

Perry Holcomb
North Augusta, SC 29841-2173 USA

Member of AstroMart, Cloudy Nights, and eBay (as "eaglescourt") with feedback I'm not ashamed of!!

guodong · #5 19-08-2008, 09:57 AM

Hi, perry

I bought it from USA (astromart) and shipped to Australia, the freight is high. You the better look for one from astromart. It will by much cheaper.

Good luck
Gordon

Quote:

Originally Posted by peeech

Hey "Guodong",
New member of this group from the northern hemisphere!!

Would you be interested in shipping the Mini 60ED to the states, specifically SC, zip 29841?

And if so, bottom line total in USD.

Thanks,

Perry Holcomb
North Augusta, SC 29841-2173 USA

Member of AstroMart, Cloudy Nights, and eBay (as "eaglescourt") with feedback I'm not ashamed of!!

MortonH · #6 19-08-2008, 01:38 PM

Hi,

Does any combination of those adapters allow the scope to be used visually with a 2" diagonal?

I've tried looking at the Hutech website but there are so many options!

Cheers

Morton

guodong · #7 20-08-2008, 11:30 AM

Hi, Morton

The screw thread at the end of the borg mini tube is M57, so maybe you can use 7502, and then a 2" holder (anyone of 7501, 7504, 7505, 7506, 7508, 7509). I'm also not very sure.

Cheers
Gordon

Quote:

Originally Posted by MortonH

Hi,

Does any combination of those adapters allow the scope to be used visually with a 2" diagonal?

I've tried looking at the Hutech website but there are so many options!

Cheers

Morton

guodong · #8 15-09-2008, 11:22 PM

last chance, price reduced

650$ +freight. Tripod only: 220$+ freight