[FOR SALE] Celestron Dew and Power Controller 4X

[LucasB (Lucas)]

Hello Everyone,

I have for sale a new Celestron Smart DewHeater and Power Controller 4X for sale. It is a great controller that can be used with any telescope/mount and measures temperature and humidity and uses a temperature probe to add only the required heat required for dew mitigation. It also has 4x DC power inputs (5 if you include the input that can switched to an output when using the XT60 jack, a USB 3.2 hub and 4 dew heater controllers,

I am also including 1x Celestron thermistor that is not included with the controller retail package

Looking for $650 + postage.

Cheers,
Lucas

PS: Specs below from the Bintel site

Dew Heater Ports: 4x, ports, RCA jack, compatible with Celestron Dew Heater Rings and other 3rd party vendor heating straps
Thermistor ports: 4x ports (one for each dew heater port), 2.5mm Audio jack, compatible with Celestron Dew Heater Rings and optional Celestron Thermistor
12V DC power output port: 3x ports, barrel connector jacks (5.5mm/2.1mm), 7A max for each port
Variable DC Power Output Port: 3V-12V variable output, barrel connector jack (5.5mm/2.1mm), 5A max
USB Port: 3x ports, USB 3.2 Type A ports, up to 2.5A output for each
AUX ports: 3x ports, allows connection to Celestron mounts for HC control, also allows connection of optional accessories
PC port: USB 3.2 Type B, allows connection to PC for control with CPWI
12V DC power input port: Threaded barrel connector jack, 5.5mm/2.1mm, 10A max input
High current 12V DC power input port: XT60 jack, 20A max input
Included power cable: Cigarette lighter plug on one end, XT60 plug on other end, 10 ft. long, 20A fuse protected
Environmental sensor: Measures ambient temperature and humidity, integrated into enclosure "bridge" to thermally isolate
Enclosure construction: Aluminum with integrated fan
Clamp: Fits CG-5 and CGE dovetails (also can be strapped onto tripod leg)
Electronic protections: Fuse protected, reverse polarity protected, low voltage cut-off