is it possible to run the heq5 off astro software to make it goto capable , i have done the shoestring mod on the hand controller so i was wondering if it could be patched into starrynight or any other astro software?
is it possible to run the heq5 off astro software to make it goto capable , i have done the shoestring mod on the hand controller so i was wondering if it could be patched into starrynight or any other astro software?
Yep. You'll have to wait until the brainy guys answer how to do it, but it is can certainly be done. As far as I know it is only one cable.
is it possible to run the heq5 off astro software to make it goto capable , i have done the shoestring mod on the hand controller so i was wondering if it could be patched into starrynight or any other astro software?
On your current hand controller, what is the fastest slew rate?
if it has a square box hand controller with 4 buttons and little switches that have North south and speed increments you will need to get a GOTO controller board which can be quite expensive. The EQMOD will not work with the older type boards.
yep thats the controler 4 x buttons north and south and 3 rates of speed , is this now going to be an expensive job and the possability of it not working?