How to convert an NEQ6 pro to take losmandy style dovetails ?

[5ash (Philip)]

Hi , does anyone know the best way to convert an NEQ6pro vixen saddle to accept losmandy style dovetails?
Regards philip

[peter_4059 (Peter)]

https://www.admaccessories.com/product/mount-adapters/

[Tulloch (Andrew)]

I think this is what you need - I have the CGEM one, expensive but they work ...
https://www.admaccessories.com/produ...dle-dv-series/

Andrew

[Outcast (Carlton)]

This is the route I went for my Ioptron CEM25 some time last year...

https://www.bintel.com.au/product/or...addle-adapter/

However, I haven't been able to locate one available in Australia today so, not sure if they are still available... so, maybe not so helpful

Cheers

[bojan]

Have a look here.. from post #15

[Hemi]

I went the ADM replacement saddle route: 10m Job. Easy.
Did it a few yrs ago (AZEQ6), very happy.

[ChrisV (Chris)]

+1 ADM. I also did it with a CGEM. Beautiful sturdy saddle.

[g__day (Matthew)]

I adapted a Vixen Atlux head to hold a Losmandy side saddle bar using a Takahashi head - as the holes were in the exact position i Needed. I measured everything very carefully then got in contact with Bintel who checked it all ordered everything for me - worked a treat!