ADM 'D' series saddle which has been polished and the locking knobs modified to allow the saddle to be used as a 'Tip-In' saddle. This involved enlarging the holes on the clamping piece and turning down a part of the knobs to allow the saddle to open a bit further than standard so that there is no need to slide the dovetail in, just align the bottom and tilt the dovetail in.
There is also a third hole drilled into the saddle, see pictures. There are a few rub marks from use but a little bit of Autosol paste will bring it back to "Bling"
$100 includes the Puck for the post 2008 EQ6/AZ-EQ6 mounts
postage about $10 extra
