Go Back   IceInSpace > Equipment > Equipment Discussions
Register FAQ Calendar Today's Posts Search

Reply
 
Thread Tools Rate Thread
  #1  
Old 14-01-2013, 06:20 PM
LewisM's Avatar
LewisM
Novichok test rabbit

LewisM is offline
 
Join Date: Aug 2012
Location: Somewhere in the cosmos...
Posts: 10,389
Orion rich field guidescope

Bought an Orion Rich Field short tube guidescope whilst I was at Sirius Optics today. The demo example looked good, so I bought one ($180).

Got it home and unwrapped. OMG!

Orion QC checkers missed this one! OK, it's a guidescope and aesthetcs aren't vital, but...

1. black overspray at the back of the tube (where the focuser body attaches) on the white tube. Quite a LOT!

2. Back overspray/run on the bottom edge of the dewshield.

3. Black run on the exposed edge of the dewshield, and they sat it down on a surface, and it congealed into a pool of hardened paint! About 2mm thick, with a sharp edge.

4. Silver Orion data decal lifting

5. Sun warning deal placed at an oblique angle!

Wow. I set to work with some metho which removed the black overspray, chipped off the sag with a scalple and rubbed that down too, removed both decals entirely and cleaned glue residue with alcohol.

Then I had to regrease the rack and pinion - the grease was like araldite!

For $180 it's OK, but really quite poor QC qith this one Works fine, which is the important thing, but we all like our rigs to look presentable too.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 08:32 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement