Large format 2.5" Moonlite focuser that I bought a year and a half ago from astromart for a 10" RC that never arrived.
Compatable with 10 & 12" GSO (astrotech, etc) RC scopes
The body has been upgraded to newer style bearing blocks that can collimate the drawtube to the focuser body without having to resort to collimating via the mounting flange (see photo). there is also a 3" long drawtube and, the original 1-1/2" travel drawtube should you want to use this on an SCT (a different flange is required). Both of these drawtubes are the 68mm threaded type so you have the option of mounting your imaging camera via threads.
Also included is a Stepper motor with mounting hardware and a mini V2 controller. There is a power cable that may be used with Anderson PowerPoles (see photo) but I tested it with a standard 12v plug without issues. Also, included are the USB cable and cable to connect the motor to the controller.
Also comes with a 68mm to t-thread locking ring adapter (this ring has a few nicks in it). the 68mm threaded to 2-1/2" compression ring adapter, the 68mm threaded to 1-1/4" compression ring adapter
$1100 AUD plus shipping, I will ship for free in NZ
