I've been downloading the avi's off the camera with the video output setting at 320x240.
Should I change the settings to 640 x 480 ?
Tell me what to do.
Thanks
Jeanette
I would. Go to Settings, and change the output to 640x480.
Like Mike suggests, it MAY slow things down slightly, but with most it seems to work just fine.
All sort of ****e happened when I changed the settings. Frustrating. TV lines through the avi's, the program won't allow preview on screen so I don't know when to stop, lots of dropped frames, and lots of doubled up frames, blah, going back to old system.
The TV card is in an old computer running at only 333mhz, this could explain the glitches.
Memories
My first puter ran at 25mhz had an 89meg hdd which I dblspaced to 160mb. I used to think it was sooo hot. I bought a CD rom drive and speakers, $600, and used to brag about my Multimedia setup. I thought I would never fill up the hard drive cause it was so huge. LOL
Memories
My first puter ran at 25mhz had an 89meg hdd which I dblspaced to 160mb. I used to think it was sooo hot. I bought a CD rom drive and speakers, $600, and used to brag about my Multimedia setup. I thought I would never fill up the hard drive cause it was so huge. LOL
To be read in a Yorkshire Accent...
<YORKSHIRE accent>
Megahertz!!! You wuz lucky, we 'ad an 6502 processor @ 16Khz wi' 4Kb ram and used to program via t' Hex key pad in 'sembler....and you try tellin' t' young people that todaay and they dooon't belive you....
</YORKSHIRE accent>