Need a member with a machine lathe in Melbourne for a small job

[stephenb (Stephen)]

I have 4 x 180mm lengths of 20mm dia. aluminium rod. I need 4mm holes drilled in both ends of each rod to a depth of 15-20mm.

I'm guessing this will only be a 15 minute job.

If there is any member who might have a machine lathe for this small job in Melbourne, preferably north or north west but I am prepared to travel a little way. It is for a small Dob I'm putting together.

Any assistance appreciated.

[stephenb (Stephen)]

Thanks to the members who contacted me. I appreciate the offers for assistance which have been put to me.