Filters and scope size

[mercedes_sl1970]

Hi there

Posted this Q in another thread but suspect it may have become buried... (http://www.iceinspace.com.au/forum/s...ad.php?t=17831)

I've been wondering if there is a minimum aperture for scopes/binos that O-III HB filters could be used with? Eg. would 100mm BT45 binos or an 80mm refractor be too small?

I guess my question is whether there is much light loss with these filters?

Thanks

Andrew

[Peter Bobroff]

I have used the OIII filter on an 80mm refractor, great view of the Veil Nebula.

I have a setup to fit OIII and UHC filters on to 7x50 binoculars - interesting but not too serious.

I think you can use them on anything.

[Peter Bobroff]

I haven't found the HB filter nearly so useful. I use it only on the Horsehead and have found that a 14" to be the minimum. However friends of mine swear they can see it with smaller scopes.

[iceman (Mike)]

I wouldn't get the HBeta - it's useful only on one or two objects, and even then I believe a big aperture is required.

An O3 or UHC filter can be used on any size scope and will be useful on any size scope, but if using it on a small scope just remember that it will cut out some light, and with smaller apertures you want all the light you can get!

[mercedes_sl1970]

Thanks, Peter and Mike - appreciate the advice.

Andrew

[Don Pensack]

Originally Posted by mercedes_sl1970

Hi there

Posted this Q in another thread but suspect it may have become buried... (http://www.iceinspace.com.au/forum/s...ad.php?t=17831)

I've been wondering if there is a minimum aperture for scopes/binos that O-III HB filters could be used with? Eg. would 100mm BT45 binos or an 80mm refractor be too small?

I guess my question is whether there is much light loss with these filters?

Thanks

Andrew

So long as you keep the magnification under 10X/inch, there is no minimum size scope in which these filters are usable. I've used them in 50mm binocs.