PHD log files

[Geoff45]

I've just downloaded PHD and it seems to work ok, but I'd like to work out exactly what the mount is doing and what corrections are being made. When PHD generates a log file, what are the units of the figures that appear?
Time seems to be in seconds. What about dx and dy ---pixels?
RA duration? Ra distance--arc sec?
Geoff

[JohnH]

Your log will be like this..

PHD Guide 1.5 pre2 -- 03/14/0722:50:12
Guiding begun
lock 476.0 328.0, star 476.0 328.0
RA angle 1.5, rate 0.0019 aggr 1.0
DEC angle -0.1, rate 0.0035, Dec mode 1
Frame,Time,dx,dy,Theta,RADuration,R ADistance,DECDuration,DECDistance
1,3.324,-0.02,0.01,2.7,0.0,0.0,0.0,0.02
2,6.809,-0.02,0.01,2.6,0.0,0.0,0.0,0.02
3,10.304,-0.03,0.01,2.7,0.0,0.0,0.0,0.03
4,13.789,-0.02,0.02,2.5,0.0,0.0,0.0,0.03
5,17.284,-0.03,0.03,2.4,0.0,0.0,0.0,0.03
6,20.769,-0.03,1.00,1.6,480.6,-0.90,44.4,0.15
7,24.785,-0.03,0.00,3.1,48.0,-0.09,0.0,0.03

Frame = acquisition #
Time = # sec since start
dx and dy = distance in pixels in X and Y directions of camera
Theta = angle star forms from lock point to current position
RADuration = Duration of pulse in RA msec
RADistance = Amount of displacment in RA only in pixels (would be
equal to dx or dy if camera is squared to RA/Dec)
DecDuration = Duration of pulse in Dec msec
DecDistance = Amount of displacement in Dec only in pixels

Also check out :

http://tech.groups.yahoo.com/group/stark-labs-astronomy-software/

For more info - icluding the PHD log analyser in the files section..

[Geoff45]

Thanks John
Just the info I needed
Geoff