Could someone please take a look at my pec data in Pem pro.

[White Rabbit]

When I generate a pec curve it gives a zero reading, and tells me I have no Pe at all, if only it where so.

I'm not sure if I've done something to the settings but I can't get it to spit anything usable out.
This happening in pem pro v 2&3
Here is a link to my Pe file, it's clean you don't need to worry.

https://www.dropbox.com/s/9w8ob7oro8x2jku/08%20feb%202137.txt?dl=0

Thanks

[cfranks]

The data looks OK to me. X and Y centroids show back and forth movement. It looks like you haven't loaded the PemPro data to the Gemini properly. I haven't loaded mine either so I've got no suggestions there.

[White Rabbit]

This was the Pe recording prior to creating a curve. My issues is is that when I try and create a curve it tells me that my mount will have 0 PE and the curve is flat lined. I wish my pe would 0 but I find that extreamly hard to believe.

Thanks for taking a look.

Sandy

[AndrewJ]

Gday Sandy
Can you upload the full log file so we can try and replicate the problem??

Andrew

[White Rabbit]

Will do, I'll do it tonight.

Cheers