RC experts advice please - servos

[bloodhound31]

Does anyone know of a servo with a lower profile than this one (http://www.hobbyking.com/hobbyking/store/__27570__Turnigy_TGY_50700M_Low_Pro file_High_Torque_Mechanical_Retract _Servo.html) at 23mm high?

Baz.

[acropolite]

Baz, you can get servos considerably smaller, but the available torque drops. If you can do with less torque there are a whole lot of micro and mini servos available. Look at the Servos & parts link. http://www.hobbyking.com/hobbyking/store/__11737__HobbyKing_Ultra_Micro_Serv o_1_7g_for_3D_Flight_Left_.html

[bloodhound31]

Thanks Phil. Those micro servos only push 80 grams. I need a couple of kilos of torque at least.

Baz.

[Auster1b]

Baz, look for slim wing servos from Phil's link.

One has 6kg of torque, make sure your nose is in before operating !

http://www.hobbyking.com/hobbyking/store/__655__189__Servos_Parts-Slim_Wing_Servo.html

Neil.

[bloodhound31]

Darn it! It is much slimmer..... but it's 90 degrees off the axis I need the rotation. :mad2: