One think I am trying to understand now that manually triggered Autofocusing is working great - now that I know focus decreases by 21 steps per degree temperature change - how to invoke temperature based focus compensation between manually triiggered AutoFocus runs.
I tried to invoke this with every degree temperature change - but haven't see focus shift on my Luminance filter which I use to auto focus on at the start of each nights imaging run.
Does temperature based focus compensation only get triggered when a plan is active?
Edit - I just found my likely culprit going through the manual - I leave Auto Focus Aid open all night - howvere the APT manual states "Note that temperature compensations will not be applied when Focusing Aid, Auto Focus Aid or Bahtinov Aid are open."
There are Christmas presents under the tree APT 4.40 is here! SessionsCraft has everything one needs to sequence whole night imaging without scripts. The Object Browser got a big set of upgrades and now is a very powerful tool for targets planning combined with the Deep Sky Darkness Calculator. PlayerOne cameras are natively supported and more!
The User’s Guide is transforming to a true multimedia product thanks to the great video clips made by Mark Kelly on his Youtube channel "Southern Cross Amateur Astro". Don’t forget to subscribe! https://www.youtube.com/@SCAmateurAstro
Was APT a good project during the past year? If you think so, you may give a present and make the coming 2024 easier for APT! One time donation, monthly donation, purchasing or key renewal will be of great help! https://astrophotography.app/reward.php
Happy New Year. I was hoping that I could get back to using APT locally, but still cannot locate in the list whether APT has full compatibility with INDI Server.
I have a fully operational and low-cost INDO DIY Focuser that works better than I expected, but the last time I used APT it was not supported.
Which areas of APT do not support INDI Server operation?
This will be my last attempt to get APT as I now have a new INDI Seetup that is working error-free now (Key not to use Raspberry PI), but I like some of the APT features.
Happy New Year. I was hoping that I could get back to using APT locally, but still cannot locate in the list whether APT has full compatibility with INDI Server.
I have a fully operational and low-cost INDO DIY Focuser that works better than I expected, but the last time I used APT it was not supported.
Which areas of APT do not support INDI Server operation?
This will be my last attempt to get APT as I now have a new INDI Seetup that is working error-free now (Key not to use Raspberry PI), but I like some of the APT features.
Hi Malcolm,
The INDI/INDIGO support is very extensive in APT. The main missing part is support for DSLRs, but we hope to fix that soon
If your focuser has an ASCOM driver you can skip the INDI
The INDI/INDIGO support is very extensive in APT. The main missing part is support for DSLRs, but we hope to fix that soon
If your focuser has an ASCOM driver you can skip the INDI
Unfortunately, it is INDI only and no one has attempted to port it across. I would like to myself, but have limited programming experience.
I also have a DSLR as well. I was hoping for a DSLR via INDI and remotely control everything remotely in my home to an external mini-computer with Linux and INDI running.
I will keep receiving posts and hopefully be able to decipher if INDI will work with DSLR and Focuser via INDI.
The updates are visible and accessible via 3 ways:
- Online at - https://astrophotography.app/usersguide/
- Offline as CHM and PDF files from Downloads->User's Guide Tab
- Offline as setup that updates the APT installation with the latest CHM and PDF from Downloads->User's Guide Tab
If you are using APT on Windows 10, please apply APT 4.42 in order to avoid crashes. The latest Windows 10 update changed the list control behavior and is causing the usage of Stars, Custom/ToDo tabs in Object Browser, Check Lists and few other places to close APT.
We are using the released to add a few more new features.