#1  
Old 03-02-2013, 07:33 PM
AdrianF's Avatar
AdrianF (Adrian)
Currently Scopeless

AdrianF is offline
 
Join Date: Sep 2007
Location: Moura Qld
Posts: 1,774
Canon 550D help

Can anyone recommend a camera repair shop to fix/replace the glass(?) over the camera sensor on my 550D? Don't ask me how it has happened but it looks like the glass as been scratched. The camera was ok when it was put into the camera bag a few months ago but now has a spot right in the middle of the image and what I thought was a hair on the right hand side of the image. I have used compressed air and a lens pen but they are still there. I have had a look at images I made 3 months ago they are not there.

Adrian
Reply With Quote
  #2  
Old 03-02-2013, 08:13 PM
Octane's Avatar
Octane (Humayun)
IIS Member #671

Octane is offline
 
Join Date: Dec 2005
Location: Canberra
Posts: 11,159
I would be taking it to your local Canon service centre, in my opinion.

H
Reply With Quote
  #3  
Old 03-02-2013, 08:18 PM
AdrianF's Avatar
AdrianF (Adrian)
Currently Scopeless

AdrianF is offline
 
Join Date: Sep 2007
Location: Moura Qld
Posts: 1,774
I spoke to our local canon service centre (250k away) over the phone. They claim that if the glass needs replacing they would not replace the glass and would have to send it away and could be gone for 2 to 3 months.

Adrian
Reply With Quote
  #4  
Old 03-02-2013, 08:24 PM
DJT (David)
Registered User

DJT is offline
 
Join Date: Nov 2011
Location: Sydney
Posts: 1,452
You could try this place, Sydney Camera Centre


They bailed me out when I modded a 30d and stuffed up the connections. Classic camera repair place

http://www.cameraservicecentre.powerup.com.au/

Having been dropping hints at them to get into the mod game...
Reply With Quote
  #5  
Old 03-02-2013, 08:30 PM
AdrianF's Avatar
AdrianF (Adrian)
Currently Scopeless

AdrianF is offline
 
Join Date: Sep 2007
Location: Moura Qld
Posts: 1,774
Thanks will give them a call tomorrow.

Adrian



Quote:
Originally Posted by DJT View Post
You could try this place, Sydney Camera Centre


They bailed me out when I modded a 30d and stuffed up the connections. Classic camera repair place

http://www.cameraservicecentre.powerup.com.au/

Having been dropping hints at them to get into the mod game...
Reply With Quote
  #6  
Old 03-02-2013, 10:59 PM
OzEclipse's Avatar
OzEclipse (Joe Cali)
Registered User

OzEclipse is offline
 
Join Date: Jun 2012
Location: Young Hilltops LGA, Australia
Posts: 1,177
Adrian,

Make sure you ask for an estimate.

If the camera is unmodded, consider sending it away O/S to http://www.spencerscamera.com/ and having it modded. Spencers charge about $300 for a basic conversion. You'll have to factor in freight. The mod will include a new filter to replace the scratched one.

This will be more expensive than getting the filter replaced by Canon but they will probably charge a fair chunk of the mod cost.

Joe
Reply With Quote
  #7  
Old 04-02-2013, 10:26 AM
AdrianF's Avatar
AdrianF (Adrian)
Currently Scopeless

AdrianF is offline
 
Join Date: Sep 2007
Location: Moura Qld
Posts: 1,774
Just had a quote for $575 to replace sensor unit as the glass can not be replaced by itself. Is this right?
May as well buy a camera body and be done with it
Adrian
Reply With Quote
  #8  
Old 04-02-2013, 11:07 AM
Octane's Avatar
Octane (Humayun)
IIS Member #671

Octane is offline
 
Join Date: Dec 2005
Location: Canberra
Posts: 11,159
I agree, just get another camera for that cost.

H
Reply With Quote
  #9  
Old 04-02-2013, 05:26 PM
AdrianF's Avatar
AdrianF (Adrian)
Currently Scopeless

AdrianF is offline
 
Join Date: Sep 2007
Location: Moura Qld
Posts: 1,774
Here is part of the ail reply.
f we can clean the LPF successfully with out removing the sensor the price would be $70.00 (I still think this is the most likely scenario)
To remove the sensor and clean Cost of $200.00 Second most likely scenario.
To remove and replace the LPF and Sensor (Comes as a unit) Assemble adjust and check $575.00 This is the near worst case scenario.

But to verify any of the above scenarios I have to get it to Sydney.

Adrian
Reply With Quote
  #10  
Old 05-02-2013, 01:46 PM
OzEclipse's Avatar
OzEclipse (Joe Cali)
Registered User

OzEclipse is offline
 
Join Date: Jun 2012
Location: Young Hilltops LGA, Australia
Posts: 1,177
Quote:
Originally Posted by AdrianF View Post
Here is part of the ail reply.
f we can clean the LPF successfully with out removing the sensor the price would be $70.00 (I still think this is the most likely scenario)
To remove the sensor and clean Cost of $200.00 Second most likely scenario.
To remove and replace the LPF and Sensor (Comes as a unit) Assemble adjust and check $575.00 This is the near worst case scenario.

But to verify any of the above scenarios I have to get it to Sydney.

Adrian
Adrian,

If LPF and Sensor comes as a unit, why can they be modded - ie have the filter swapped for a clear glass or enhanced transmission filter.

Joe
Reply With Quote
  #11  
Old 05-02-2013, 08:22 PM
AdrianF's Avatar
AdrianF (Adrian)
Currently Scopeless

AdrianF is offline
 
Join Date: Sep 2007
Location: Moura Qld
Posts: 1,774
It probably could but I don't really want to mod this camera. Maybe the 350D

Adrian
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 06:23 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement