[WITHDRAWN] Meade tripod Castors, 10inch Wedge, Field tripod

[whitek2h (Kevin)]

I have finally de-forked my 10inch LX50 have the following looking for a good home.

- Meade field tripod M2080 for 10inch LX50/200 $150 SOLD
- Meade wedge plate for 10inch LX50/LX200 $125 - Sold 14/1/13


I also recently purchased castors for the Meade M2080 tripod.
8 or 10inch LX200 etc.
Scope Roller for M2080 Meade tripod $150 + Freight

http://www.scoperoller.com/casters.shtml
After I fitted these my observing time substantially increased. So if you can roll your scope out the garage door for a quick 30mins of observing I recommend these. Only 12months old in as new condition. Paid $200USD asking $150 + postage



Kevin

[rodsmith (Rod)]

P.M sent -wedge

Rod

[warpsl (Jason)]

hi.do you know what the maximum height,and weight capacity of the tripod is?regards.

[whitek2h (Kevin)]

Hi Jason,
The tripod is for Meade's 10inch SCT LX200 which must be well over 20Kgs.
The web site lists height range as 860mm to 1370mm.
I'll make an actual measurement when I get home tonight.
Kevin

[warpsl (Jason)]

hi again.it's about 250mm short of what i need.thanks anyway,regards.

[brian nordstrom (As avatar)]

Hi Kevin , do you still have the origonal feet for the tripod ?
Brian.

[whitek2h (Kevin)]

Hi Brian,
The feet were sold with the tripod.
Cheers Kevin

[whitek2h (Kevin)]

I have added a photo showing the dimensions of the castors.
Also checkout this link for details.
http://www.scoperoller.com/ScopeRollerM2080.shtml

Note the M2080 is not the current Meade tripod as a small change was made some years ago, check your paperwork for the model number of your tripod or see the web site for details.

Cheers Kevin

[redterry (Terry)]

Hi, are the castors still available? and if so would they be suitable for the LX200R?

Terry