Go Back   IceInSpace > Equipment > ATM and DIY Projects

Reply
 
Thread Tools Rate Thread
  #1  
Old 29-07-2015, 11:24 AM
Ilmenite (Nick)
Registered User

Ilmenite is offline
 
Join Date: Jul 2015
Location: South Lake
Posts: 9
DIY electric (auto?)focuser...

Having had a look around at the assorted commercial and homemade electric and autofocusers, it seems that there should be a very simple way to make an electric autofocuser. In the crudest version, the electric focuser consists of a single on-off-on switch which controls the polarity of the voltage to a geared DC motor mounted on the telescope focuser in some way. To this can be added a speed controller which varies either voltage or duty cycle (PWM) to slow the motor.
Autofocus is simply the computerisation of the switch (and possibly the speed controller) to move the focus one way of the other according to some quality algorithm.
Thus, coupling the two aspects together should be very simple, the computer controlling the switching aspect. The projects I have seen to do this invariably seem to use the ASCOM standard so that they can be driven using assorted software packages.
My thought is to pick a very simple (and cheap) USB relay controller with two relays and write an ASCOM compatible driver for it. This will then do pretty much everything an autofocuser is required to do (move in, out). A third relay could give a high-low speed control.
Does anyone else have any thoughts on whether this is possible, or has already been put into operation?
Reply With Quote
  #2  
Old 30-07-2015, 08:59 AM
ZeroID's Avatar
ZeroID (Brent)
Lost in Space ....

ZeroID is offline
 
Join Date: May 2010
Location: Auckland, NZ
Posts: 4,949
It's obviously possible, depends on your fabrication skills. The important ctriteria as I understand is accuracy and reproducability, ie focus home, focus set positions can be reproduced by the same settings. Hence most electronic focussers use a stepper motor rather than voltage controlled systems.
Reply With Quote
  #3  
Old 30-07-2015, 07:27 PM
AlexN's Avatar
AlexN
Tunnel Vision

AlexN is offline
 
Join Date: Mar 2008
Location: Caboolture, Australia
Posts: 6,801
Google the SGL ascom focuser or SGL motorfocus. I built a couple of arduino based focusers and they work every bit as well as robofocus
Reply With Quote
  #4  
Old 31-07-2015, 07:56 AM
wasyoungonce's Avatar
wasyoungonce (Brendan)
Certified Village Idiot

wasyoungonce is offline
 
Join Date: Jul 2006
Location: Mexico city (Melb), Australia
Posts: 2,336
Nick contact Dave Trewan build one of his units, cheap, ASCOM compliant easy to build and use.

http://www.dt-space.co.uk/SharpSky/
http://www.dt-space.co.uk/SharpSky_Kit/
http://dt-space.co.uk/SharpSkyClient/
http://www.dt-space.co.uk/SharpSky_TC/
http://www.sharpsky.net/
Reply With Quote
  #5  
Old 07-08-2015, 02:38 PM
brown_rb (Robert)
Registered User

brown_rb is offline
 
Join Date: Aug 2010
Location: Wellington, NZ
Posts: 11
or build you own based on this

http://sourceforge.net/projects/mydc...ativedcfocuser
Reply With Quote
  #6  
Old 07-08-2015, 05:10 PM
Bassnut's Avatar
Bassnut (Fred)
Narrowfield rules!

Bassnut is offline
 
Join Date: Nov 2006
Location: Torquay
Posts: 5,064
There are 2 kinds of focuser positioning, absolute and relative. Absolute involves encoders or steppers from a home position, relative is simple DC drive. Both work, but have different performance.
Reply With Quote
Reply

Bookmarks

Tags
diy, electric, focuser

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 11:06 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement