|
Skywatcher 8/10 inches help
Hi there ,
I have a sort of unusual request if anyone can help.
I'm kindly asking if anyone can please send me a detailed photo of the Alt axis wiring of the motor and encoders plugged to the control board.
I'm looking at the Wi Fi version on the Scopes so I'm assuming around 2 to 3 years old scopes.
The reason I have this request is because I'm trying to fit a new control board in my 8 inches Go To Flextube.
The old board has a different wiring and so I'm trying to retrofit the new control board.
Looks like in the newer models the motor encoder is wired separately. There should be three bundles of cables : 2 with 4 wires from the two encoders and one with three wires from the motor.
For your reference the old models have only one control board (MC003), the newer models with WiFi have two boards mounted on top of each other.
Thank you in advance for your help.
|
