Go Back   IceInSpace > Images > Deep Space

Reply
 
Thread Tools Rate Thread
  #1  
Old 18-06-2024, 11:08 AM
PRejto's Avatar
PRejto (Peter)
Registered User

PRejto is offline
 
Join Date: Jan 2011
Location: Rylstone, NSW, Australia
Posts: 1,415
M83 (at f14 TEC-140ED)

This is the first image I have taken from my new Observatory near Rylstone, NSW, Australia.

It started as an experiment using a Trius SX694 mono camera with Baader 2.5" filters and my TEC-140ED. I took 45 min in RGB (each filter) and was initially dissappointed with the image scale. I remembered owning an Astrophysics BARADV (barlow) and decided to experiment.

https://www.astro-physics.com/baradv

The setup is quite simple: The barlow was located 50mm from the CCD by mounting it on an extension tube just on the OTA side of the SX FW. The whole contraption goes into a Baader QuickLock that had a 2" Astronomik L filter. I removed the L filter from the Wheel.

My initial thought was to take a lot of luminance with the mono camera and then switch over to my Trius SX-694 color model for RGB. After taking 29 subs/5 min in luminance (through a 2" Astronomik filter) I had a look at the resulting luminance. I was impressed with the results which exceeded my expections given I was operating at essentially f14 and .5 arc-sec resolution. I think there is some advantage to imaging this way. The Luminance at f14 is far better than what I can see in the colour image at f7 (and both nights were inj good seeing).

The resulting image is a combination of RGB taken at f7 and luminance at f14. It is my first image in many years and was 99% processed in Pixinsight, also a first.

I'm interested to try this barlow with my TEC-180....

Thanks for looking!

https://www.astrobin.com/full/voc1ex/0/
Attached Thumbnails
Click for full-size image (BARADV.jpg)
70.6 KB79 views
Reply With Quote
  #2  
Old 18-06-2024, 12:02 PM
CaptainCook (Gary)
Registered User

CaptainCook is offline
 
Join Date: Apr 2024
Location: Sydney
Posts: 37
That is fantastic. Slightly related to this-I have also imaged at f/14 (using a C90 MAK I would normally only use on the moon), principally out of curiosity and lack of money to upgrade what I have. I was pleasantly surprised-bearing in mind with this set up I cannot use any filters, I live in B7 skies and I was doing short (1-2 min) exposures due to difficulty of guiding at (FL 1250mm) 0.7 arcs pix scale on an AZGti!

This is Cent A
This is Key hole
This is Trifid

Yes, they are not APODs and they are not 'something new or interesting targets'' but 2 years ago I would've bitten your hand off for these and remember its a $300 ''spotting scope''. Maybe if there are any people setting out it might be useful to show how you can squeeze the most out of whatever you have.
Reply With Quote
  #3  
Old 18-06-2024, 06:14 PM
gregbradley's Avatar
gregbradley
Registered User

gregbradley is offline
 
Join Date: Feb 2006
Location: Sydney
Posts: 17,951
A superb M83 Peter. Very nicely processed to.

Greg.
Reply With Quote
  #4  
Old 19-06-2024, 11:25 AM
Retrograde's Avatar
Retrograde (Pete)
a.k.a. @AstroscapePete

Retrograde is online now
 
Join Date: Oct 2011
Location: Sydney
Posts: 1,669
Excellent M83 Peter & congrats on first light from the new observatory!

The resolution on this is superb.
Reply With Quote
  #5  
Old 19-06-2024, 11:36 AM
strongmanmike's Avatar
strongmanmike (Michael)
Highest Observatory in Oz

strongmanmike is offline
 
Join Date: May 2006
Location: Canberra
Posts: 17,304
Excellent Peter you have experimented, successfully, with exactly what I have regularly mused over doing with my rig but remain too scared to move anything in case I stuff it all up In fact, I think you even offered to lend me that barlow Welcome back to the fold, looking good

Mike
Reply With Quote
  #6  
Old 19-06-2024, 04:19 PM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 6,175
Peter,
A quality M83 , one of the best Iíve seen on this forum in quite a while
Detail, resolution and colour is superb
Well done !!
Iím assume your imaging under ideal ( darkish ) skies for Galaxy imaging ?

Martin
Reply With Quote
  #7  
Old 19-06-2024, 05:37 PM
PRejto's Avatar
PRejto (Peter)
Registered User

PRejto is offline
 
Join Date: Jan 2011
Location: Rylstone, NSW, Australia
Posts: 1,415
Dear All,

Thanks all for your kind words.

To be frank, I didn't expect to be able to even have this image. I figured that my luminance wasn't actually going to be any better than at f7 (and perhaps worse!) and I was fairly certain I didn't have nearly enough colour data, especially at f7 as I needed to upscale it to match the luminance. But, surprise surprise. I guess the tools these days are just heaps better than 3/4 years ago.

Mike, now that you mention it, I do vaguely remember that conversation about the BARADV. Then I promptly forgot I even owned it! I guess this happens when all the focus back then was on a new TEC-180, and camera and rotator system that to this day is something of a nightmare. Add moving and building a house and well, things go astray! BTW, your observatory is to die for....I hope I can see it some day.

Martin, Yes, sky can be quite dark out here at Rylstone (~3.5 hrs W of Sydney). But, it's also quite damp and fog prone....Very good, but not ideal at times, but I'm learning to cope. Wiruna is just a 30 min drive, but rather higher and I think less damp.

I'm very curious to actually try this on my TEC-180 on a planetary nebula. I think exposures will need to be quite long in narrowband.

Cheers,
Peter
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 10:53 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement