#1  
Old 08-04-2021, 03:18 PM
Merlin66's Avatar
Merlin66 (Ken)
Spectroscopy Wizard

Merlin66 is offline
 
Join Date: Oct 2005
Location: St Leonards, Vic
Posts: 8,247
Using flats on full disk solar images

All the info readily available on the use of flats (to suppress NR and dust bunnies) is applied to surface images and not to applying them to full disk solar images.
Why is still so?
Full disk images also suffer from similar ďdefectsĒ.....
One very successful method of obtaining solar flats is to use the clear plastic bag over the aperture.
Iíve been trying this method with SER videos (Firecapture) one video of the full solar disk and one with the plastic wrap in place. Using AS3! Latest version V3.1.4. A master flat can be made as a tiff and then applied during the stacking of the solar disk. Sounds pretty straight forward.....
(Seems to work well with surface images)
After three days of trials, I found a major problem.
Summary: For full disk flats to work, the master flat image must be registered 100% with the solar disk stack/ individual frames. Thereís no way I can find to actually do this! It really comes down to having ABSOLUTELY PERFECT Polar alignment with NO drift between the flat image and the solar disk stack/ individual frames.
Obviously my alignment wasnít 100%
This is not a major problem when normally imaging, AS3! will make the necessary minor corrections to give a quality outcome. The problem is how to register the flat to the individual frames ( the flat is applied to each frame during the stacking process). I donít know the answer, but I do know if you re-align the mount with some accuracy there is enough registration to remove NR etc.
I have some sample images showing the results. Still not perfect, but certainly an improvement in the suppression of NR.
If anyone has found a better more robust solution Iíd love to hear about it.

Onwards and upwards.
Reply With Quote
  #2  
Old 08-04-2021, 05:35 PM
h0ughy's Avatar
h0ughy (David)
DOGHOUSE REBORN

h0ughy is offline
 
Join Date: Apr 2005
Location: NEWCASTLE NSW Australia
Posts: 32,104
Your brave I was never successful with any flat and gave up. PS clone was used a few times for very bad dust bunnies. I did however try to perfect cleaning and sealing the image train as much as possible and cleaned the objective before a image session. It cut down so much handling time after the fact
Reply With Quote
  #3  
Old 08-04-2021, 05:53 PM
Merlin66's Avatar
Merlin66 (Ken)
Spectroscopy Wizard

Merlin66 is offline
 
Join Date: Oct 2005
Location: St Leonards, Vic
Posts: 8,247
Houghy,
Dust doesnít seem to be my primary issue, itís the annoying NR.
Reply With Quote
  #4  
Old 12-04-2021, 10:31 AM
Merlin66's Avatar
Merlin66 (Ken)
Spectroscopy Wizard

Merlin66 is offline
 
Join Date: Oct 2005
Location: St Leonards, Vic
Posts: 8,247
Limited success.
Marty (SolarChat) has suggested the flats need to be more diffuse...
I'll re-try using tracing paper (one layer or more...)
Onwards and slightly upwards
Attached Thumbnails
Click for full-size image (Sun_111245_lapl5_ap3007_no flat_resized.jpg)
149.8 KB14 views
Click for full-size image (Sun_111245_lapl5_ap8654_with flat.jpg)
10.5 KB12 views
Click for full-size image (Sun_111245_with flat_corono.jpg)
24.0 KB13 views
Reply With Quote
  #5  
Old 12-04-2021, 10:56 AM
h0ughy's Avatar
h0ughy (David)
DOGHOUSE REBORN

h0ughy is offline
 
Join Date: Apr 2005
Location: NEWCASTLE NSW Australia
Posts: 32,104
Oh so that also removes Newton rings?
Reply With Quote
  #6  
Old 12-04-2021, 11:17 AM
Merlin66's Avatar
Merlin66 (Ken)
Spectroscopy Wizard

Merlin66 is offline
 
Join Date: Oct 2005
Location: St Leonards, Vic
Posts: 8,247
David as they say...."That, is the right question!" (I Robot)


Unfortunately the Marty examples (so far) don't seem to have been applied to solar disk images showing NR.
Reply With Quote
  #7  
Old 27-04-2021, 04:19 PM
Merlin66's Avatar
Merlin66 (Ken)
Spectroscopy Wizard

Merlin66 is offline
 
Join Date: Oct 2005
Location: St Leonards, Vic
Posts: 8,247
I've finished the first draft of my re-write up.
The DropBox link:
https://www.dropbox.com/s/fxsjvi20qr...l2021.pdf?dl=0


Comments/ feedback welcome.
Summary:
A good choice of "plastic bag" as a flat diffusion filter works well with the FireCapture "Flat" - which is then applied to each video frame. Stacking in AS3! completes the process.
Attached Thumbnails
Click for full-size image (Sun_105958_no flat.jpg)
126.0 KB14 views
Click for full-size image (Sun_110228_with flat_01.jpg)
139.0 KB14 views
Click for full-size image (Sun_110632_with flat_02.jpg)
139.7 KB13 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:41 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Advertisement
Limpet Controller
Advertisement
NexDome Observatories
Advertisement
Bintel
Advertisement
Testar
Advertisement
Astronomy and Electronics Centre
Advertisement