#1  
Old 22-01-2014, 06:55 PM
julianh72 (Julian)
Registered User

julianh72 is offline
 
Join Date: Jan 2014
Location: Kelvin Grove
Posts: 1,264
Tripod dolly for Meade LX90 ACF (8")

Sorry if this has been asked and answered before - I searched, but didn't find anything that seemed to match. (I'm new here - be kind to me! )

My father has had a life-long passion for amateur astronomy, but he has been "scope-less" for quite a few years now. He has just gone and bought a Meade 8” LX90 ACF http://www.meade.com/lx90 , which is a lovely instrument, but is very heavy and bulky for someone of his advancing years to move around. (According to the specs, it weighs about 24 kg on the tripod.) He is getting quite old and frail, so I shudder to think of him trying to move it in and out of his unit – he will surely end up injuring either himself, or the scope, or both.

I’ve been thinking that what he needs is a Tripod Dolly - something like the WT600 Tripod Dolly (with locking castors) that you can find on ebay for around $50; e.g.:

http://www.ebay.com.au/itm/WT600-Uni...08d4ab0&_uhb=1

I’m hoping that the dolly would make it possible to manoeuvre through a standard doorway – it is a 3-legged “spider” which sits directly under the tripod legs, with no rigid platform of its own, so it might be possible by rotating two legs around the door jamb. If it’s too big to pivot through a standard doorway frame, his garage opens up to a nice, fairly flat driveway with good sky view (if there’s such a thing as a “good sky view” in Brisbane!), so I’m thinking it could “live” in the garage, and just get pushed out onto the driveway for use.

I’m interested to hear from someone who actually owns a telescope of this size, and has to move it outdoors to use – how do you manoeuvre yours around – brute force, or do you have some sort of “cunning plan”?
Reply With Quote
  #2  
Old 28-01-2014, 03:12 PM
julianh72 (Julian)
Registered User

julianh72 is offline
 
Join Date: Jan 2014
Location: Kelvin Grove
Posts: 1,264
Well, for the benefit of anyone else who might be interested:

I bought a generic WT600 tripod dolly on eBay (there are dozens of them listed), as an experiment for my father’s Meade 8” LX90 ACF. I would rate it as a “partial success”.

The only real problem is that the radial arms are slightly too short to take the standard Meade Field Tripod in even its lowest height / smallest footprint. The three arms are each 450 mm radius, but it turns out that they need to be at least 500 mm long to take the Meade tripod properly.

I’ve manage to rig it up, and it certainly makes the telescope a LOT easier for my father to manoeuvre. (And yes, it does wheel easily through a standard doorway, by “dancing” it one leg at a time around the door frames as you go.)

To install it on the dolly, the tripod is not quite fully spread, because the dolly arms are slightly too short for the fully spread tripod, but it effectively uses the tripod dolly to act as the bottom spreader, and it’s surprisingly robust. I’ve lashed the Meade Tripod onto the Dolly using cable ties, to make sure it doesn’t dislodge. The other consequence of “jacking up” the tripod slightly is that the supplied top spreader / eyepiece tray doesn't quite fit. (The tripod has a slightly narrower base, so the spreader needs to be slightly lower to fit between the tripod legs, and I can’t quite lower it enough using the supplied threaded bar, but I think I’ll be able to fix that by slacking off the bottom nut a bit - something to try next time I visit my father.)

The main thing to note is the the whole scope is a little bit higher - partly because the height of the dolly itself raises the tripod feet by about 100 mm above ground level, and partly because the tripod is not quite at its lowest height. However, the eyepiece is still well and truly accessible over a full range of inclinations, so it’s not really a problem.

The good news is that it is remarkably stable - better than I had expected. The castor locks fix both the wheel turn and the castor swing, so if you lock the three castors so that they are all pointed radially outwards, they lock the whole assembly very rigid, and the rubber tyres do a nice job of damping out any vibrations. The 3” castors are good at getting over small obstructions like paving joints, gaps in patio deck floorboards, etc, but are still prone to getting stuck in deeper obstructions or soft ground, which could easily topple the tripod if you weren’t being careful. It’s really only suitable for moving around on solid surfaces like timber, concrete, paving, etc - this is NOT an “all terrain” buggy!

I am sure the arrangement wouldn't satisfy an experienced purist or a serious astrophotographer, but they do say that the best telescope is the one that you can use, and fitting wheels has made the scope a lot more accessible for my elderly father. I think if I can fix the top spreader issues, and come up with a more permanent lashing arrangement, we’ll both be pretty happy.

If anyone is contemplating something similar, I think the slightly larger FT-9911 Extra Heavy Duty Tripod Dolly (search for it on eBay) would actually do the job perfectly. The arm diameter is 1050 mm, which should be big enough to take the Meade Field Tripod (but don’t quote me on that - make your own measurements, and check with the supplier first!), and it has a heavier load rating too.
Reply With Quote
  #3  
Old 30-01-2014, 11:20 PM
cmr (Chris)
Registered User

cmr is offline
 
Join Date: Aug 2011
Location: Warragul Vic
Posts: 58
Trolley for 8"SCT

Hello, I only just saw your post, I have a C8 that I fitted castors to the tripod (I thought the Dooley from eBay Di don't look strong enough) I have scope covers on so leave it outside as the tripod fully extended doesn't fit through the doors at all. I find it very handy to quickly move to the yard and use.

Seem info and photos are on this old post (hope this link works)

http://www.iceinspace.com.au/forum/s...13&postcount=5
Reply With Quote
  #4  
Old 31-01-2014, 12:34 PM
julianh72 (Julian)
Registered User

julianh72 is offline
 
Join Date: Jan 2014
Location: Kelvin Grove
Posts: 1,264
cmr,

Thanks for the reply, and the link to your arrangement. (Great minds think alike!)

As I said in my last post, the arrangement I have set up is not perfect, but it is working well enough for now. I have been thinking of taking a look at the castors and see if they can be taken off the dolly and fitted directly onto the Meade Tripod. (Either that, or head down to our local Bunnings and see if they have any heavy-duty locking castors which can be used instead.)

Cheers!
Reply With Quote
  #5  
Old 03-02-2014, 01:52 AM
julianh72 (Julian)
Registered User

julianh72 is offline
 
Join Date: Jan 2014
Location: Kelvin Grove
Posts: 1,264
First Light - success!

Here's a picture of our set-up on our "First Light" test.

We managed to get about an hour of relatively cloud-free viewing early tonight, in which time we set up the scope, got the auto-alignment and tracking working beautifully, and used "Go To" to check out the Moon (very thin crescent, very low on the horizon, Jupiter (belts and 4 Galilean moons clearly visible), the Great Orion Nebula, and a few other stars, before the clouds closed in.

We were pretty happy with out first real run!
Attached Thumbnails
Click for full-size image (IMG_20140202_205958.jpg)
183.1 KB63 views
Reply With Quote
Reply

Bookmarks

Tags
dolly, tripod

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 04:53 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Advertisement
NexDome Observatories
Advertisement
Testar
Advertisement
Limpet Controller
Advertisement
Bintel
Advertisement
Astronomy and Electronics Centre
Advertisement