#1  
Old 03-10-2024, 05:26 PM
rembrandt (Noel)
Registered User

rembrandt is offline
 
Join Date: Mar 2012
Location: Perth Australia
Posts: 9
HELP/advise needed

hi, I've recently purchased a C925 XLT with F6.3 reducer and ASI294MC Pro.
sharpcap/Phd2/OAG
hoping it was to be a step up from my 10'' reflector for imaging.
I'm starting to think it was a step backward.

After taking 120 subs @ 180s gain 119 and stacking M83 I can see only the faintest hint of the galaxy...what am i doing wrong? or have i made a very expensive mistake?

any help would be appreciated.
thanks in advance.
Rem.
Reply With Quote
  #2  
Old 03-10-2024, 08:01 PM
rmuhlack's Avatar
rmuhlack (Richard)
Professional Nerd

rmuhlack is offline
 
Join Date: Nov 2011
Location: Strathalbyn, SA
Posts: 955
I use the QHY version of that camera, and although my scope is faster than yours (f4.75) i'm still getting plently of signal on that target after 6 hours of integration.

what software are you using to stack the images? what are you using to process the stacked image? were the sub frames calibrated with darks/flats/bias etc?
Reply With Quote
  #3  
Old 04-10-2024, 10:57 AM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 6,374
If you’re imaging a dim galaxy under LP skies B6 to B9 then your stacked linear image is always going to be faint where you just see the bright core and very little detail in the spiral arms.
Did you stretch the image ?
With that amount of data even under LP skies you should see some detail above the noise floor when stretched, particularly with a big scope.
Was your scope focused correctly on a small star ?
I also concur with Richard , a calibrated data set will adjust the background to the correct brightness values.
Cheers
Martin
Reply With Quote
  #4  
Old 31-10-2024, 05:33 PM
rembrandt (Noel)
Registered User

rembrandt is offline
 
Join Date: Mar 2012
Location: Perth Australia
Posts: 9
richard,
stacking in autostakert, processing in siril .
Ive used darks only .
I did stretch in Siril but very disappointing result as i said.
Reply With Quote
  #5  
Old 31-10-2024, 05:35 PM
rembrandt (Noel)
Registered User

rembrandt is offline
 
Join Date: Mar 2012
Location: Perth Australia
Posts: 9
to be totally honest I got a better result using an ED80 on the same target
Reply With Quote
  #6  
Old 31-10-2024, 10:43 PM
Leo.G (Leo)
Registered User

Leo.G is offline
 
Join Date: Nov 2016
Location: Lithgow, NSW, Australia
Posts: 1,043
Could it possibly just been a night of bad seeing?
It's ruined many of my nights and I'm too blind or too stupid to notice.


Could it have possibly been a lightly fogged front element?
Reply With Quote
  #7  
Old 01-11-2024, 06:47 AM
PRejto's Avatar
PRejto (Peter)
Registered User

PRejto is offline
 
Join Date: Jan 2011
Location: Rylstone, NSW, Australia
Posts: 1,461
Perhaps you could post a screen shot here of a single subframe with just a screen stretch?

How did you decide that 180 sec was sufficient?

Did you use flats and were they calibrated correctly?

M83 is a pretty bright subject. This seems to be an odd issue so I suspect as others have mentioned that something is going wrong with your processing. However, if single subs in a linear state look poor then stacking will not magically improve the situation. You need decent signal on each sub.

P
Reply With Quote
  #8  
Old 01-11-2024, 11:43 AM
rembrandt (Noel)
Registered User

rembrandt is offline
 
Join Date: Mar 2012
Location: Perth Australia
Posts: 9
Peter,
I will need to recapture the image as I deleted it in disgust.
am i wrong in thinking single sub exposure time ie 180s isnt that important and that the total integration time that matters..
ie 180s x 100 vs 360s x50 = the same end result.. ?
Reply With Quote
  #9  
Old 01-11-2024, 02:31 PM
ChrisD's Avatar
ChrisD (Chris)
Image, Stack, Repeat.

ChrisD is offline
 
Join Date: Apr 2021
Location: Melbourne
Posts: 276
This image was taken with a 1986 vintage Celestron C8, using a Celestron focal reducer and an ASI294MC Pro camera, with 300-second exposures captured in Bortle 5-6 skies. I processed these subs about two years ago.

If you’re not directly under a streetlight, you should be able to achieve results on par with or potentially better than this.

Without seeing your stacked image, it’s challenging to pinpoint the exact issue. However, I recall my initial experience with an IMX571-based camera: after processing the subs, I was disappointed with the dark and low-detail result. In my case, I had taken the dark frames with the camera set to a 50 bias offset, but the NINA imaging session defaulted to a 20 bias offset. As a result, when the darks were subtracted from the subs, the image lost its nebulosity and went too dark. It might be worth checking if something similar happened with your setup.

Chris
Attached Thumbnails
Click for full-size image (M83_Cropped.jpg)
125.2 KB19 views
Reply With Quote
  #10  
Old 01-11-2024, 02:41 PM
Startrek (Martin)
Registered User

Startrek is offline
 
Join Date: Dec 2017
Location: Sydney and South Coast NSW
Posts: 6,374
Just a thought….,
When you gather more data why not try stacking in a bonafide DSO stacker.
Autostakkert obviously does stack DSO subs but it’s primarily a planetary stacker and was designed mainly for Planetary imaging. Emil did provide an option for stacking DSO but I believe it doesn’t have pixel rejection algorithms , struggles with any field rotation and a few other short falls.
I use ASTAP , it’s open sourced freeware, and the results are right up there with Pixinsight. Been using it for nearly 2 years now and its fits viewer is top notch for reviewing subs on the fly during a session.

Cheers
Martin

Last edited by Startrek; 01-11-2024 at 03:09 PM.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 05:19 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement