Since I am being clouded out, with no chance of viewing the moon, I am selling my HEQ5PRO mount. Mount is in good condition, comes with a cable to plug into a car lighter socket, has one counterweight which is 3.85lb or 1.75Kg.
Everything except the tripod is packed inside a Craftright box from Bunnings - included. Synscan hand controller is version 2.04.
Price for this mount as displayed is $750 plus shipping. Prefer local Sydney buyers as you will want to inspect and check out the mount. Hasn't been used for a number of years - but turned on fine and responds to controls to move and park.
Still available.
Last edited by John0z; 28-07-2015 at 09:04 PM.
Reason: No longer pending
Still available - it is great as a portable mount. The tripod has velcro tabs on each leg, and a matching tab on the back of the handset - allows you to attach the handset conveniently without fumbling for it. All that you see in the photos is included - excepting the curtains of course.
Last edited by John0z; 08-04-2015 at 06:36 PM.
Reason: Add velcro information for the tripod.
I found another counterweight in the garage - this one is 3.5Kg or 7.7lbs. It must have originally come with the mount, but I didn't use it since I was only using a 90mm Maksutov. The bore of the counterweight is 20.5mm. As the counterweight bar on the mount is 18mm, I will make a little PVC spacer so that the counterweight fits snugly.
I made the spacer this morning - here it is fitted to the counterweight. It locks on easily onto the counterweight bar. The counterweight is a bit scratched and a little rusted, but it is only a lump of metal.
A new HEQ5PRO would set you back $1799 from Bintel. Ok, my mount is an older model, but still works. Anyone interested?
Still available. The Craftright case itself is worth $69 from Bunnings. The older version handset v2.04 is not an issue if you are going to use EQMOD. Anyone interested? Make me an offer.
I can ship at cost, but it is recommended for someone to come and inspect it.
