#261  
Old 05-05-2007, 10:00 PM
RB's Avatar
RB (Andrew)
Moderator

RB is offline
 
Join Date: Aug 2005
Posts: 26,136
Congrats Jerry, great setup.
May I ask what baseplate you're using between the TOA and the EM400?
I've got the same setup, TOA 150/EM400, but love how you've set yours up with all the extra bits.

Reply With Quote
  #262  
Old 05-05-2007, 10:37 PM
Omaroo's Avatar
Omaroo (Chris Malikoff)
Let there be night...

Omaroo is offline
 
Join Date: Aug 2006
Location: Hobart, TAS
Posts: 7,639
Hey Paul - where's the rest of the counterwight? How much do you have on?
Reply With Quote
  #263  
Old 06-05-2007, 08:36 AM
74tuc
Registered User

74tuc is offline
 
Join Date: Sep 2006
Location: Sandy Creek(Sth.Aust.)
Posts: 153
Offset Plate and Counter-weight

Offset Plate.

The offset plate is a plate of 6061 Aluminium (would prefer 6081) which has small ammounts of Titanium and Cobalt etc. The plate is 12.7mm thick and weight 3.79 Kg. I calculated the offset dimensions (by hand). All bearing surfaces (EM400 drive boss etc.) are machined. The holes on the RHS are M8 drilled and tapped for accessories. The holes for the TGM-2 mount are countersunk(also tapped). And finally the plate was anodised.

Counter Weight

The total counter weight as seen is 19.5Kg and as shown is "bottom heavy". The little green weight on the end (replaces the safety screw) was made from lead out of battery terminals (all my fishing weights melted!!). This weight has a bolt molded into the lead so it screws in as a replacement "screw". The counter weight was calculated(by hand!) before I made it. Please note that the bottom weight (3.5 Kg) in right on the end of the weight shaft so its effect is maximum. Also the total load, by design is closer to the RA drive axis than in the original Tak design because of the use of the high strength of the structural alloy used in the plate.


Hope this explains things,

Jerry
Attached Thumbnails
Click for full-size image (Offset_plate_topsJPG.jpg)
75.4 KB606 views
Click for full-size image (Offset_plate_bottomsJPG.jpg)
124.7 KB580 views
Reply With Quote
  #264  
Old 06-05-2007, 10:15 AM
duncan's Avatar
duncan
Duncan

duncan is offline
 
Join Date: Jan 2007
Location: Weipa FNQld
Posts: 1,091
Hi all,
Here's a shocking photo of me and my new toy.
Attached Thumbnails
Click for full-size image (Duncans first 003.jpg)
125.2 KB663 views
Reply With Quote
  #265  
Old 06-05-2007, 10:22 AM
Ric's Avatar
Ric
Support your local RFS

Ric is offline
 
Join Date: May 2006
Location: Wamboin NSW
Posts: 12,405
Hi Duncan, is that your radio telescope in the background.

Nice scope
Reply With Quote
  #266  
Old 06-05-2007, 10:27 AM
duncan's Avatar
duncan
Duncan

duncan is offline
 
Join Date: Jan 2007
Location: Weipa FNQld
Posts: 1,091
I don't think the missus would let me convert it LOL. I was going to take some photos today but my little darling took the camera up to Mt.Garnet Rodeo. LOL
Reply With Quote
  #267  
Old 07-05-2007, 10:40 PM
Omaroo's Avatar
Omaroo (Chris Malikoff)
Let there be night...

Omaroo is offline
 
Join Date: Aug 2006
Location: Hobart, TAS
Posts: 7,639
Dragging out the old friend.

The yard imaging cannon is nearing readiness...

After a six-month hiatus, I;ve dragged out the 12" LX and have now fitted one of the William Optics 66mm Petzvals as guide scope. The new larger dew shield I made is felt-lined and seals around the OTA beautifully. The slight extra weight of the shield is good as it offsets the weight of the cameras and G/S. I'm still to fit the lower 2-D counterweight and also need to rotationally balance it around RA. The Dec motor on one fork, along with the GPS affect the balance so I need to occupy the battery recess on the other fork with around 1.25kg.

Should be out and about as soon as I can get GuideDog to run properly on the older (read: semi dew-dispensible) lappy.

There goes the back again........

Cheers
Chris
Attached Thumbnails
Click for full-size image (P5070007.sized.jpg)
62.6 KB657 views
Click for full-size image (P5070011.sized.jpg)
67.7 KB631 views
Click for full-size image (P5070018.sized.jpg)
71.5 KB669 views

Last edited by Omaroo; 07-05-2007 at 11:03 PM.
Reply With Quote
  #268  
Old 07-05-2007, 10:47 PM
Ric's Avatar
Ric
Support your local RFS

Ric is offline
 
Join Date: May 2006
Location: Wamboin NSW
Posts: 12,405
She looks beautiful Chris

But I'm a little bit biased

Cheers
Reply With Quote
  #269  
Old 07-05-2007, 11:00 PM
Omaroo's Avatar
Omaroo (Chris Malikoff)
Let there be night...

Omaroo is offline
 
Join Date: Aug 2006
Location: Hobart, TAS
Posts: 7,639
hehe.. of course you are Ric Large SCT's with piggy-backed scopes all mounted on a wedge really are a thing of beauty though, aren't they? I can't wait to see if I can get a good polar alignment now......
Reply With Quote
  #270  
Old 07-05-2007, 11:12 PM
Ric's Avatar
Ric
Support your local RFS

Ric is offline
 
Join Date: May 2006
Location: Wamboin NSW
Posts: 12,405
I have also been toying with the idea of a piggy back scope as well, maybe an ED80. but the wedge must come first and I only have enough brownie points for that at the moment.

Cheers
Reply With Quote
  #271  
Old 08-05-2007, 03:25 AM
RB's Avatar
RB (Andrew)
Moderator

RB is offline
 
Join Date: Aug 2005
Posts: 26,136
Quote:
Originally Posted by 74tuc View Post
Offset Plate.

The offset plate is a plate of 6061 Aluminium (would prefer 6081) which has small ammounts of Titanium and Cobalt etc.
Thank you for the info Jerry, I've admired your setup since I first saw it in an featured in an ad in one of the local magazines.

I'm looking forward to setting up my TOA150/EM400 up soon too.

Reply With Quote
  #272  
Old 08-05-2007, 07:17 AM
marc4darkskies's Avatar
marc4darkskies (Marcus)
Billions and Billions ...

marc4darkskies is offline
 
Join Date: Mar 2007
Location: Quialigo, NSW
Posts: 3,142
Quote:
Originally Posted by 74tuc View Post
Here are pics of my imaging and visual setup showing:

1. A TOA 150 refractor for general viewing and photography.
2. An 80mm guidescope on the guiding mount,
3. A Canon EOS 350 with a 20 - 200mm lens(USM) for widefield shots.

Jerry.
Nice to see other 150 owners - very nice setup there Jerry! See my signature below for a link to my stuff! Have you noticed any differential flexure with your TGM?

Cheers, Marcus
Reply With Quote
  #273  
Old 08-05-2007, 06:58 PM
74tuc
Registered User

74tuc is offline
 
Join Date: Sep 2006
Location: Sandy Creek(Sth.Aust.)
Posts: 153
Hi Chaps,

Thanks for the good words and Marcus I've looked at your first pic on pbase and I think it is very impressive. I like the detail provided with your 'scope/camera. When the financial dust settles here I might consider getting a camera like yours. I told the financial controller here about the wonderful camera you had (she was cooking at the time), she sought of went stiff then started hurling vegies into the wok with more force than I thought was necessary. I walked away without saying a thing and surfed the web .

Re: Differential flexure.

I am sure the TGM gives negligible the plate flexing will cause more DF. DF can be managed in my case as I do not use focal lengths longer than 3000mm.

The problem I have is that I cannot prove to myself the minute blemishes are caused DF alone. Off axis the star image distortion is caused by spherical aberration (no field flatner), polar alignment inaccuracies, and DF.

I have made a counter weight for the guidescope/mount combination but not installed this weight as the system is still under test.

The main thing is to choose a guide scope matched to your system and choose one that is as light as possible. The optimum guidescope is smaller than one chosen by common rules of thumb. I use an achromatic refractor with a green filter and a B&W guide CCD. Chromatic aberration (and other distortions) has the effect of reducing the guiding accuracy. I am writing a note (partially complete) for the ASSA on the relation between the main 'scope/imaging CCD and the guidescope/guide CCD. I'll pass this on to you when it is completed.

Regards,

Jerry.
Reply With Quote
  #274  
Old 08-05-2007, 08:56 PM
marc4darkskies's Avatar
marc4darkskies (Marcus)
Billions and Billions ...

marc4darkskies is offline
 
Join Date: Mar 2007
Location: Quialigo, NSW
Posts: 3,142
Quote:
Originally Posted by 74tuc View Post
...I told the financial controller here about the wonderful camera you had (she was cooking at the time), she sought of went stiff then started hurling vegies into the wok with more force than I thought was necessary. I walked away without saying a thing and surfed the web .
Try bribery - worked for me!

Quote:
Originally Posted by 74tuc View Post
...I am writing a note (partially complete) for the ASSA on the relation between the main 'scope/imaging CCD and the guidescope/guide CCD. I'll pass this on to you when it is completed.
I'd be very interested to see that - thanks Jerry! Email me.

And thanks too for the kind words on my first image ... now if only the moonless nights would coincide with some clear skies for a change!!

Cheers, Marcus
Reply With Quote
  #275  
Old 08-05-2007, 09:04 PM
MortonH's Avatar
MortonH
Deprived of starlight

MortonH is offline
 
Join Date: Nov 2006
Location: Sydney
Posts: 3,843
Here are my humble scopes. The ED115S is not pictured as it's up for sale!

It's incredible to think that I bought the semi-apo Megrez for 679 UK pounds when they first came out, and now you can get an ED80 for less than that in dollars.


Morton
Attached Thumbnails
Click for full-size image (Scopes.jpg)
70.3 KB650 views
Reply With Quote
  #276  
Old 08-05-2007, 10:35 PM
74tuc
Registered User

74tuc is offline
 
Join Date: Sep 2006
Location: Sandy Creek(Sth.Aust.)
Posts: 153
Hi Morton,

I'm interested to know how much you want for the ED115 - I have a friend who might be interested. Please send me a private email - thanks.

The wide field views through the Megrez would look excellent (?). Next time there is a clear night look at the Stargate asterism at about x50 - tell us what you see. I am most interested.

Marcus,

I'll try the bribary thing later - I'll not lay it on too thick, though - she's got a bit savvy on the cost of things astronomical!!

Re Guide Scopes: I'll send you the first installment on Thursday - I'm off work tomorrow(Wednesday).


Clear Skies,

Jerry.
Reply With Quote
  #277  
Old 08-05-2007, 10:45 PM
MortonH's Avatar
MortonH
Deprived of starlight

MortonH is offline
 
Join Date: Nov 2006
Location: Sydney
Posts: 3,843
The ED115 has just sold. Sorry.

Morton

P.S. Excuse my ignorance of southern skies - what's the stargate asterism???
Reply With Quote
  #278  
Old 08-05-2007, 10:54 PM
74tuc
Registered User

74tuc is offline
 
Join Date: Sep 2006
Location: Sandy Creek(Sth.Aust.)
Posts: 153
Hello Morton,

Sorry about the 'scope - Such is life.

Stargate? see:

http://platformx.sourceforge.net/Name/index.html

Jerry.
Reply With Quote
  #279  
Old 08-05-2007, 11:04 PM
MortonH's Avatar
MortonH
Deprived of starlight

MortonH is offline
 
Join Date: Nov 2006
Location: Sydney
Posts: 3,843
Nice - definitely worth looking for.

Morton
Reply With Quote
  #280  
Old 25-05-2007, 06:21 PM
Starkler's Avatar
Starkler (Geoff)
4000 post club member

Starkler is offline
 
Join Date: Sep 2004
Location: Melbourne
Posts: 4,900
Quote:
Originally Posted by MortonH View Post
The ED115 has just sold. Sorry.
Sold to me in fact

Heres a couple of pics of my new toy
Attached Thumbnails
Click for full-size image (ed115s1.jpg)
101.2 KB726 views
Click for full-size image (ed115s2.jpg)
79.6 KB632 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 03:02 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement