Go Back   IceInSpace > Equipment > ATM and DIY Projects

Reply
 
Thread Tools Rate Thread
  #1  
Old 18-06-2020, 12:26 PM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
Revived project - Finderscope for my C11

Some time ago I was playing with idea to use old 60mm binocular objective for finder scope ( I don't remember where it came from, it was a long time ago)... Realization of this project was tricky because I didn't want to abuse (too much) my friend with machining...
So - today, I had some free time and decided to finish this.
I prepared:
- the lens in its tube
- 48mm OD Holman drain pipe from Bunnings and associated caps
- 3D printed rings (I did them 3 years ago, just in case...)

After 1 hour of planning and machining the finder scope is pretty much functional.

I still need to make the bracket which will fit onto C11, that will require a search through my junk in the shed...
Attached Thumbnails
Click for full-size image (DSC_0363.jpg)
203.3 KB109 views

Last edited by bojan; 18-06-2020 at 12:40 PM.
Reply With Quote
  #2  
Old 18-06-2020, 02:04 PM
Tinderboxsky's Avatar
Tinderboxsky (Steve)
I can see clearly now ...

Tinderboxsky is offline
 
Join Date: Feb 2012
Location: Kingston TAS
Posts: 1,075
I like it. I am also a keen fan of re-purposing items.
Reply With Quote
  #3  
Old 18-06-2020, 02:38 PM
Saturnine (Jeff)
Registered User

Saturnine is offline
 
Join Date: Jul 2008
Location: Wollongong
Posts: 2,258
Also like your work there, great to see people still DIY. I have made several finder scopes from old binocular objectives and the eyepieces, just glue in some crosshairs and an 90 deg correct image diagonal.
Reply With Quote
  #4  
Old 18-06-2020, 03:45 PM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
Well, we are armatures, right ? and DIY is only part of this wonderful hobby. It is a pity it was not encouraged more.. maybe this is one of the reasons why prices for astro-equipment is so inflated...

Attached bellow is how the attachment to C11 finderscope base will look like.
Attached Thumbnails
Click for full-size image (c_01.jpg)
44.1 KB91 views
Click for full-size image (c_02.jpg)
68.1 KB77 views

Last edited by bojan; 18-06-2020 at 04:19 PM.
Reply With Quote
  #5  
Old 18-06-2020, 09:23 PM
mswhin63's Avatar
mswhin63 (Malcolm)
Registered User

mswhin63 is offline
 
Join Date: May 2009
Location: Para Hills, South Australia
Posts: 3,622
Very nice project. I have a busted bino's and am still considering repairing them but has been a tricky endeavour. This has inspired me to consider it for another project.

Possibly right about the inflated price.
Reply With Quote
  #6  
Old 20-06-2020, 05:37 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
Rings are on...
Attached Thumbnails
Click for full-size image (DSC_0366.jpg)
165.0 KB104 views
Reply With Quote
  #7  
Old 20-06-2020, 06:44 AM
h0ughy's Avatar
h0ughy (David)
Moderator

h0ughy is offline
 
Join Date: Apr 2005
Location: NEWCASTLE NSW Australia
Posts: 33,282
Great project and the results are a quality product by the looks.
Reply With Quote
  #8  
Old 20-06-2020, 08:59 AM
Tinderboxsky's Avatar
Tinderboxsky (Steve)
I can see clearly now ...

Tinderboxsky is offline
 
Join Date: Feb 2012
Location: Kingston TAS
Posts: 1,075
Yes, a great looking outcome. I like the way you have added a “serial number” for it.
Reply With Quote
  #9  
Old 20-06-2020, 09:26 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043

This is temporary,I will spray it (white outside, black inside) later
Reply With Quote
  #10  
Old 04-07-2020, 11:58 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
Functional on C11... (~12x). I found a better fitting for eyepiece (from Russian binos)

Still to do:
- 3D print lens cover

- insert cross hairs (from optical fiber)
- attach RDF
Attached Thumbnails
Click for full-size image (DSC_0361.jpg)
198.8 KB57 views
Click for full-size image (DSC_0358.jpg)
145.2 KB56 views
Reply With Quote
  #11  
Old 05-07-2020, 10:04 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
RDF mounted (on aluminium flat bar 20x3mm, Aluminium Trade Centre)
Attached Thumbnails
Click for full-size image (DSC_0362_.jpg)
158.6 KB49 views
Click for full-size image (DSC_0360.jpg)
176.8 KB54 views
Click for full-size image (DSC_0359.jpg)
206.8 KB61 views
Reply With Quote
  #12  
Old 12-07-2020, 06:55 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
Placing cross hairs..

Optical fiber is glued (one side only) with UV-curable glue ($5 on ebay).
Very delicate operation, with help of stereo microscope.
Attached Thumbnails
Click for full-size image (DSC_03610.jpg)
205.3 KB51 views
Click for full-size image (eyepiece_tube_crosshairs.jpg)
200.2 KB49 views
Reply With Quote
  #13  
Old 14-07-2020, 04:36 PM
Sunfish's Avatar
Sunfish (Ray)
Registered User

Sunfish is offline
 
Join Date: Mar 2018
Location: Wollongong
Posts: 1,909
Great work. Very delicate.
What lenses did you use.?
I wonder if an old 135mm screw mount would work.
Reply With Quote
  #14  
Old 15-07-2020, 07:22 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
Ray, I am sure any old(er) telephoto it will be OK for this purpose (even for guiding).. however probably it will be heavier than this single Ř60mm/230mm doublet. (The Plössl eyepiece came from old russian binos).
Reply With Quote
  #15  
Old 17-07-2020, 03:37 PM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
In use tonight...
Attached Thumbnails
Click for full-size image (DSC_0358.jpg)
199.9 KB49 views
Click for full-size image (DSC_0361.jpg)
205.5 KB58 views
Reply With Quote
  #16  
Old 18-07-2020, 06:21 AM
LostInSp_ce's Avatar
LostInSp_ce
Unregistered User

LostInSp_ce is offline
 
Join Date: Mar 2017
Posts: 754
Nice work all round but especially with the crosshairs. Don't forget to print a logo on the cap. It isn't official until it's branded.
Reply With Quote
  #17  
Old 24-07-2020, 01:56 PM
Sunfish's Avatar
Sunfish (Ray)
Registered User

Sunfish is offline
 
Join Date: Mar 2018
Location: Wollongong
Posts: 1,909
Impressive Bojan. Much better than the celestron version if it was anything like mine. And double cross hairs.

Do you think this one will work as a guider?

The tubular part is just a few thick t2 adapters screwed together to get the focal plane distance of the old t2 screw mount lense.
Attached Thumbnails
Click for full-size image (FBB8EB34-7BC9-4319-B5E4-7EE93AC83FBC.jpg)
91.8 KB37 views
Reply With Quote
  #18  
Old 24-07-2020, 02:10 PM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
Ray, most likely it will, I read people successfully used even 50mm lens.
As to my cross hairs.. it is single fiber. It only looks like double because of refraction of light (fiber acts as cylindrical lens).
However.. now you gave me a bug in my ear.. I will try to do double cross soon, I have enough fiber for couple of them.

Last edited by bojan; 24-07-2020 at 02:21 PM.
Reply With Quote
  #19  
Old 03-08-2020, 08:45 AM
Sunfish's Avatar
Sunfish (Ray)
Registered User

Sunfish is offline
 
Join Date: Mar 2018
Location: Wollongong
Posts: 1,909
Hi Bojan,

Thanks. The 135 lense works and as an auto guide scope. Focusing a little beyond infinity but maybe that helps.

Would be interesting to try and add your crosshairs.



Quote:
Originally Posted by bojan View Post
Ray, most likely it will, I read people successfully used even 50mm lens.
As to my cross hairs.. it is single fiber. It only looks like double because of refraction of light (fiber acts as cylindrical lens).
However.. now you gave me a bug in my ear.. I will try to do double cross soon, I have enough fiber for couple of them.
Reply With Quote
  #20  
Old 15-08-2024, 06:45 AM
bojan's Avatar
bojan
amateur

bojan is offline
 
Join Date: Jul 2006
Location: Mt Waverley, VIC
Posts: 7,043
When trying to observe the planets during daytime (and close to the Sun) it occurred to me it would be good to have lens lid at hand all the time, to prevent the damage inside (until now I didn't bother to cover the finder lens..).
So I designed and printed it.. It may need some refinement in the future (like spring loaded stop to prevent it falling back and covering the finder during aiming at objects), but most likely it will be OK as is.
Attached Thumbnails
Click for full-size image (c_30.jpg)
48.0 KB34 views
Click for full-size image (c_19.jpg)
122.0 KB48 views
Click for full-size image (c_20.jpg)
88.8 KB29 views
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 08:34 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement