Go Back   IceInSpace > Equipment > ATM and DIY Projects

Reply
 
Thread Tools Rate Thread
  #41  
Old 16-07-2015, 09:18 PM
Mokusatsu (Australia)
Registered User

Mokusatsu is offline
 
Join Date: Nov 2014
Location: Canning Vale
Posts: 137
I went to a local factory that makes custom kitchen counters and scored a 1mx30cm piece of some anonymous grey laminate from their scrap pile for free. It's not the famous ebony star, but nevertheless gives a low friction surface and was a huge improvement over the previous material I was using, Teflon on melamine. So +1 to the tips below about going to kitchen places. I paid nothing but brought a little money just in case they asked. I had called in advance explaining that I just needed a scrap of laminate for a project and asked if they had a "bin to raid".

Question on some other stuff:

What would be a good source for inexpensive hex bolts (i.e. 150mm M10 stainless steel). They're about $6ea at Bunnings, but can anyone recommend either locally (Perth) or online a place that can sell them at a significant discount to that? I need enough of them to make it worth my while saving a couple of bucks...

Also, carbon fibre tubes for dobsonian trusses. I've Googled and found a few places that sell 1M lengths. Anywhere longer tubes can be bought at a reasonable price?

Alternatively, since I'm aware CF is still crazily expensive, where's a good place to buy Aluminium tubes for the same purpose?
Reply With Quote
  #42  
Old 24-07-2015, 07:09 AM
MattT's Avatar
MattT
Reflecting on Refracting

MattT is offline
 
Join Date: Jul 2011
Posts: 1,215
Bolts from http://www.metrobolts.com.au/Pages/index.html

In Melbourne and have everything I would want.

For Brass bits and they have (when I went in) a decent off cuts bin

http://www.georgewhite.com.au/

Aluminium Trade Centre as mentioned before is also good.

https://www.aluminiumtc.com.au/

Last edited by MattT; 24-07-2015 at 07:22 AM.
Reply With Quote
  #43  
Old 05-02-2016, 04:24 PM
ADRIAN
Registered User

ADRIAN is offline
 
Join Date: Apr 2007
Location: geelong
Posts: 6
Does anyone know where i can get carbon fiber rod
In Australia or Melbourne?
Reply With Quote
  #44  
Old 05-02-2016, 05:52 PM
troypiggo's Avatar
troypiggo (Troy)
Bust Duster

troypiggo is offline
 
Join Date: Nov 2008
Location: Brisbane, Australia
Posts: 4,846
I've seen it at Small Parts and Bearings in Capalaba (Brisbane). They're a hobby and parts shop (eg remote cars/helis etc), so maybe try something equivalent in Melbourne?
Reply With Quote
  #45  
Old 07-01-2021, 07:13 PM
Rocket (Ed)
Registered User

Rocket is online now
 
Join Date: Jan 2019
Location: Canberra, Australia
Posts: 21
UNC Bolts etc

The Fastener Warehouse is pretty good for UNC fasteners. They are in Brisbane and sell on eBay.
Ed
Reply With Quote
  #46  
Old 26-05-2021, 02:30 PM
legswilly (Werner)
Registered User

legswilly is offline
 
Join Date: Apr 2021
Location: Wauchope, NSW, Australia
Posts: 47
Protective mirror coating, where to get in Oz

I am researching making my own mirror and coating it with silver. So far I have found the chemicals to do it and the how.

One more thing I would like is a coating I can apply myself after the silvering is done.
I could try and get it from the US. Surely there must be something available here. I get my glasses coated, they ask a bit of money for it, but they must use some stuff to coat.
Any ideas?
Reply With Quote
  #47  
Old 26-05-2021, 03:48 PM
Saturnine (Jeff)
Registered User

Saturnine is offline
 
Join Date: Jul 2008
Location: Wollongong
Posts: 2,258
Quote:
Originally Posted by legswilly View Post
I am researching making my own mirror and coating it with silver. So far I have found the chemicals to do it and the how.

One more thing I would like is a coating I can apply myself after the silvering is done.
I could try and get it from the US. Surely there must be something available here. I get my glasses coated, they ask a bit of money for it, but they must use some stuff to coat.
Any ideas?
Coating glasses (lens ) with magnesium flouride mostly I think, is a completely different process as it is to let light through, and chemicals than is used for coating mirrors, which is a thin reflective coating of silver or aluminium over coated by silicon monoxide, as Stephan mentioned.
Reply With Quote
  #48  
Old 26-05-2021, 07:32 PM
legswilly (Werner)
Registered User

legswilly is offline
 
Join Date: Apr 2021
Location: Wauchope, NSW, Australia
Posts: 47
Quote:
Originally Posted by Saturnine View Post
Coating glasses (lens ) with magnesium flouride mostly I think, is a completely different process as it is to let light through, and chemicals than is used for coating mirrors, which is a thin reflective coating of silver or aluminium over coated by silicon monoxide, as Stephan mentioned.

Where did Stephan mention it? I can't find it in this thread.

Where can I get silicon monoxide, how is it applied?
Reply With Quote
  #49  
Old 17-11-2022, 09:31 AM
Boozlefoot's Avatar
Boozlefoot
SQM 21.98 mag./arc sec2

Boozlefoot is offline
 
Join Date: Nov 2016
Location: As far from Suburbia as practical
Posts: 450
Knobs,handles,spur gears, collimation screws..... Qld based.

www.tea.net.au
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:19 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement