#1  
Old 06-12-2009, 04:16 PM
jimipage77 (Maurice)
Registered User

jimipage77 is offline
 
Join Date: May 2009
Location: Santo Domingo, Dom Rep
Posts: 3
Autofocus with mirror lock on SCT

I am setting up a Meade LX200R 8'' SCT with mirror lock and a orion guidescope on top of it and want to do automated imaging.

I have always imaged with refractors and now I am trying an SCT, I have a question. I understand the mirror has to be locked after focusing to avoid focusing shift during the night. If mirror is locked, no further focusing can be made right? How does people do focusing during the night with an electronic focuser?
Reply With Quote
  #2  
Old 06-12-2009, 04:20 PM
Octane's Avatar
Octane (Humayun)
IIS Member #671

Octane is offline
 
Join Date: Dec 2005
Location: Canberra
Posts: 11,159
Maurice,

My understanding would be that an electronic focuser is a device which hangs off the back of the SCT. Much like how people retrofit Crayford focusers on the backs of SCTs. Once they've locked the main mirror, then, all focusing is done via the Crayford.

Regards,
Humayun
Reply With Quote
  #3  
Old 06-12-2009, 07:39 PM
GrampianStars's Avatar
GrampianStars (Rob)
Black Sky Zone

GrampianStars is offline
 
Join Date: Apr 2005
Location: Western Victoria
Posts: 776
Smile

G'day Maurice
The Meade 1209 electric focuser is not for remote use
http://www.mapug-astronomy.net/Astro....htm#meade1209

IMO there's only 1 recommended automated focus
via robofocus controlled by software
http://www.rogergroom.com/astronomy/..._jmi_robofocus
Reply With Quote
  #4  
Old 06-12-2009, 08:36 PM
marki's Avatar
marki
Waiting for next electron

marki is offline
 
Join Date: Mar 2008
Posts: 2,427
You will need to fit a crayford focuser to the back of the SCT (I use a moonlite with stepper motor control and a moonlite controller). Set the crayford about halfway then rough focus with the main mirror. Once you are reasonably close lock the mirror and use the crayford by eye or with autofocus routines e.g. Maxim DL if your setup allows.

Mark
Reply With Quote
  #5  
Old 06-12-2009, 09:36 PM
citivolus's Avatar
citivolus (Ric)
Refracted

citivolus is offline
 
Join Date: Sep 2007
Location: Carindale
Posts: 1,178
Quote:
Originally Posted by GrampianStars View Post
G'day Maurice
The Meade 1209 electric focuser is not for remote use
http://www.mapug-astronomy.net/Astro....htm#meade1209
There 1209 can be remotely controlled. While it doesn't allow you to predict a given focus setting as it does not know its absolute position, nor does it offer automatic temperature compensation, it does have the ability to reach focus using software auto-focus routines. It still has significant advantages over focusing by hand.

Additionally, the 1209 is a Crayford style focuser, which virtually eliminates backlash. It has a relatively short travel distance (I recall around 15mm), meaning you can set the primary mirror focus position, lock it, and have enough play to maintain focus throughout an evening; however if you want to switch to a terrestrial target, you will need to refocus by first unlocking the primary and then do the rest by hand.

Microfocusers with absolute value readings and temperature compensation will be of little use to someone outside of an observatory setting, as they need the primary to be locked down and then calibration run. If you move your primary, the calibration values will be useless.

Regards,
Eric
Reply With Quote
  #6  
Old 07-12-2009, 01:03 AM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
I use the #1209 Zero Shift focuser remotely on my 12" and 10" Lx200's.
The ShoeString USB adaptor works very well!
Reply With Quote
  #7  
Old 07-12-2009, 05:36 AM
AndrewJ
Watch me post!

AndrewJ is offline
 
Join Date: Mar 2006
Location: Melbourne
Posts: 1,905
As others have commented, the 1209 can be remotely controlled
however re
Quote:
I understand the mirror has to be locked after focusing to avoid focusing shift during the night.
The focus lock wont prevent focus "shift" as it cant stop thermal effects
The main thing the mirror lock is supposed to do is address mirror "flop"
as the tube passes through vertical.

Andrew
Reply With Quote
  #8  
Old 07-12-2009, 05:41 AM
Merlin66's Avatar
Merlin66 (Ken)
Registered User

Merlin66 is offline
 
Join Date: Oct 2005
Location: Junortoun Vic
Posts: 8,904
There may be some minor thermal effects, but if the mirror is locked the zero shift focusers seem to do a good job!
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 12:58 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
Testar
Advertisement