Go Back   IceInSpace > Beginners Start Here > Beginners Equipment Discussions

Reply
 
Thread Tools Rate Thread
  #1  
Old 13-06-2021, 08:07 PM
ausmensan's Avatar
ausmensan (Simon)
Galactic Explorer

ausmensan is offline
 
Join Date: Dec 2007
Location: Perth, Australia
Posts: 49
Looking for guidance on the correct order, and image train length

OK,

Here is my equipment:

CPC1100

Visual back removed, first item is the f6.3 focal reducer.

I then want to put in a ASI ADC (which I already have),

Then either a focal wheel, or just use a 1.25 UV/IR cut filter (already have) attached to the imager.

(I also have a two inch ZWO Duo Band filter with a Hydrogen Alpha/OIII filter which slots in, not sure if I can use this in the train??)

I am guessing I need some spacers here, as the length is supposed to be 105mm? I do not have any spacers, but I do have an M42/M48 adapter.

Can anyone assist in putting this togther with a diagram or instructions on how to proceed? If I have to buy something else to make this work, then I will.

Many thanks.
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 09:44 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Testar
Advertisement
Bintel
Advertisement