Go Back   IceInSpace > Equipment > Equipment Discussions

Reply
 
Thread Tools Rating: Thread Rating: 26 votes, 4.85 average.
  #321  
Old 17-11-2010, 11:48 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,996
Quote:
Originally Posted by xstream View Post
Thanks for your help over the phone the other day Gary. After the Comm port reassignment it worked a treat.
Hi John,

Great to catch up with you on the phone and fabulous to hear that the COM
port reassignment did the trick.

Take care in your travels and hope to see you again soon.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
Phone +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au
Reply With Quote
  #322  
Old 23-11-2010, 01:56 AM
Acrab's Avatar
Acrab (Victor Martinez)
Registered User

Acrab is offline
 
Join Date: Sep 2010
Location: Cádiz (Spain)
Posts: 32
Hello,
Is this connection correct for ArgoNavis data serial 1 cable?
- RJ 9 pin 1 a DB9 Pin 2
- RJ 9 pin 2 a DB9 pin 3
- RJ 9 pin 3 a DB9 pin 5
Thanks
Víctor Martínez
Reply With Quote
  #323  
Old 23-11-2010, 01:07 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,996
Quote:
Originally Posted by Acrab View Post
Hello,
Is this connection correct for ArgoNavis data serial 1 cable?
- RJ 9 pin 1 a DB9 Pin 2
- RJ 9 pin 2 a DB9 pin 3
- RJ 9 pin 3 a DB9 pin 5
Thanks
Víctor Martínez
Hi Victor,

Rather than "RJ 9" Argo Navis uses an RJ6 connector.
I recommend you refer to Appendix C - Port Pin Descriptions on page 199
of the Argo Navis User's Manual as the diagram removes any ambiguity with regards
the pin number convention used on the RJ ports.
Edition 10 of the Manual can be downloaded from here -
http://www.wildcard-innovations.com....mentation.html

We also can ship serial cables to anywhere in the world at a discount shipping rate
significantly lower than the online rate. Email sales@wildcard-innovations.com.au
for details.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
Fax +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au
Reply With Quote
  #324  
Old 23-11-2010, 08:49 PM
Acrab's Avatar
Acrab (Victor Martinez)
Registered User

Acrab is offline
 
Join Date: Sep 2010
Location: Cádiz (Spain)
Posts: 32
Hi Gary,
Indeed I was confused, the terminal is RJ6 not RJ9. Thanks for your offer, but I do not see any problems in manufacturing the cable, it's simple.
Best regards
Víctor
Reply With Quote
  #325  
Old 24-11-2010, 09:24 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,996
Quote:
Originally Posted by Acrab View Post
Hi Gary,
Indeed I was confused, the terminal is RJ6 not RJ9.
Hi Victor,

Apologies. Actually when I wrote RJ6 it was a typo. The plug is actually
commonly known as an RJ12 which is a 6P4C style connector.
But I see you know what I meant!

Best Regards

Gary Kopff
Wildcard Innovations Pty Ltd
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
http://www.wildcard-innovations.com.au
sales@wildcard-innovations.com.au
Reply With Quote
  #326  
Old 26-11-2010, 05:50 AM
Acrab's Avatar
Acrab (Victor Martinez)
Registered User

Acrab is offline
 
Join Date: Sep 2010
Location: Cádiz (Spain)
Posts: 32
Yes Gary, thanks, no problem. I also made a longer cable for encoders
Reply With Quote
  #327  
Old 27-11-2010, 10:11 AM
Phizzy (Phill)
Registered User

Phizzy is offline
 
Join Date: May 2009
Location: Brisbane
Posts: 25
smallest dob?

Hi all
I installed an argo navis system on my skywatcher 8" collapasible dob (thanks Gary....very easy to do). I thought long and hard about getting one as it could have been seen as little bit of an overkill (price wise), but what a great product....now I can find everything I could ever want...even if I can't see it
Has anyone else fitted this to a smaller dob?

a very happy
Phill
Reply With Quote
  #328  
Old 05-01-2011, 06:32 AM
Barrykgerdes
Registered User

Barrykgerdes is offline
 
Join Date: Feb 2007
Location: Beaumont Hills NSW
Posts: 2,900
My argo was caught in the rain along with my lightbridge. Water and dirt washed right over the base of the telescope and Argo. When I got to it the argo was half covered with sand and dirt as well as being very wet.

I cleaned it up and dried it out. Then turned it on. It still works OK.

Barry
Reply With Quote
  #329  
Old 05-01-2011, 07:41 PM
erick's Avatar
erick (Eric)
Starcatcher

erick is offline
 
Join Date: Dec 2006
Location: Gerringong
Posts: 8,539
But it's defaulting to the "water" constellations now? Glad to hear it suffered no damage

Just had 10 straight nights with my Argo. Worked flawlessly! Sky so dark I had the brightness down to 1% I'm starting to learn how to find specific stars with it. Somewhat trickier than finding non-stellar where just spotting the object in the FOV is sufficient. I found that searching out small planetary nebulae is a good training intermediate between galaxies/globular clusters and individual stars. But precision pointing may be a challenge. Might be time for me to TPAS!
Reply With Quote
  #330  
Old 05-01-2011, 08:07 PM
astroron's Avatar
astroron (Ron)
Supernova Searcher

astroron is offline
 
Join Date: Mar 2005
Location: Cambroon Queensland Australia
Posts: 9,320
Quote:
Originally Posted by Phizzy View Post
Hi all
I installed an argo navis system on my skywatcher 8" collapasible dob (thanks Gary....very easy to do). I thought long and hard about getting one as it could have been seen as little bit of an overkill (price wise), but what a great product....now I can find everything I could ever want...even if I can't see it
Has anyone else fitted this to a smaller dob?

a very happy
Phill
Hi Phill
I have a 16" Dob ,with the Argo Navis I have also adapted my 20 year old Fork mount Celestron 8" SCT to take the Argo, it is a great improvement to my observing with this scope
Cheers
Reply With Quote
  #331  
Old 07-01-2011, 04:26 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,996
Argo Navis Digital Telescope Computer on 8" SkyWatcher Dobsonian

Quote:
Originally Posted by Phizzy View Post
Hi all
I installed an argo navis system on my skywatcher 8" collapasible dob (thanks Gary....very easy to do). I thought long and hard about getting one as it could have been seen as little bit of an overkill (price wise), but what a great product....now I can find everything I could ever want...even if I can't see it
Has anyone else fitted this to a smaller dob?

a very happy
Phill
Hi Phill,

Thanks for the post and Happy New Year.

Great to hear the install went smoothly on the 8" SkyWatcher.
There are quite a few installations on Dobs in this aperture range and they
are also very popular on tripod Alt/Az mounts with modest refractors on them as
well.

We've seen Argo Navis installed on everything from mounts with a pair
of binoculars right up to a 72" reflector housed in a dome.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
Phone +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au
Reply With Quote
  #332  
Old 07-01-2011, 04:30 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,996
Argo Navis in the rain

Quote:
Originally Posted by Barrykgerdes View Post
My argo was caught in the rain along with my lightbridge. Water and dirt washed right over the base of the telescope and Argo. When I got to it the argo was half covered with sand and dirt as well as being very wet.

I cleaned it up and dried it out. Then turned it on. It still works OK.

Barry
Hi Barry,

Sorry to hear the gear got an absolute soaking but good to hear that
after giving it a clean and dry that the Argo Navis is still working fine.

Recommend you give it another internal visual check in a few weeks time
just to make sure you got everything.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
Phone +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au
Reply With Quote
  #333  
Old 07-01-2011, 04:39 PM
Barrykgerdes
Registered User

Barrykgerdes is offline
 
Join Date: Feb 2007
Location: Beaumont Hills NSW
Posts: 2,900
Hi Gary

Yes I will give it a thorough check later, but I check it ever day and its been a week now since the dousing and it still works OK.

Barry
Reply With Quote
  #334  
Old 09-04-2011, 02:50 PM
Barrykgerdes
Registered User

Barrykgerdes is offline
 
Join Date: Feb 2007
Location: Beaumont Hills NSW
Posts: 2,900
Still works after 3 months

Barry
Reply With Quote
  #335  
Old 09-04-2011, 03:32 PM
GeoffW1's Avatar
GeoffW1 (Geoff)
Registered User

GeoffW1 is offline
 
Join Date: Sep 2006
Location: Sydney
Posts: 1,838
Quote:
Originally Posted by gary View Post
There are quite a few installations on Dobs in this aperture range and they are also very popular on tripod Alt/Az mounts with modest refractors on them as well.

We've seen Argo Navis installed on everything from mounts with a pair
of binoculars right up to a 72" reflector housed in a dome.

Best Regards

Gary Kopff
Ahhh Gary,

I think your best salesmen are S******er.

After having immense problems last night with an EQ5 + S*****n, I thought wistfully of my old Bintel Dobbie + AN. Never missed a beat, always in the FOV. I only traded it all as a unit because it was so bloody awkward in the car!!

I shall return

Cheers
Reply With Quote
  #336  
Old 10-04-2011, 11:23 AM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,996
Quote:
Originally Posted by GeoffW1 View Post
Ahhh Gary,

I thought wistfully of my old Bintel Dobbie + AN. Never missed a beat, always in the FOV. I only traded it all as a unit because it was so bloody awkward in the car!!

I shall return

Cheers
Hi Geoff,

Thanks for the post which is very much appreciated.

We would love to see you back.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place
Mount Kuring-Gai NSW 2080
Australia
Phone +61-2-9457-9049
Fax +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au
Reply With Quote
  #337  
Old 02-06-2011, 10:29 AM
erick's Avatar
erick (Eric)
Starcatcher

erick is offline
 
Join Date: Dec 2006
Location: Gerringong
Posts: 8,539
Happy experience last night with a newbie - new to my dob and never seen an Argo Navis.

I set her up on a tour of globular clusters in Sagittarius. Eyepiece/scope produced 56 magnification and 1.2deg true FOV. After the first, she was on her own, moving [edit - I should have said "selecting"] to the next object, pointing the scope and observing - through the whole tour.

Great!

Last edited by erick; 02-06-2011 at 04:22 PM.
Reply With Quote
  #338  
Old 02-06-2011, 02:55 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,996
Quote:
Originally Posted by erick View Post
Happy experience last night with a newbie - new to my dob and never seen an Argo Navis.

I set her up on a tour of globular clusters in Sagittarius. Eyepiece/scope produced 56 magnification and 1.2deg true FOV. After the first, she was on her own, moving to the next object, pointing the scope and observing - through the whole tour.

Great!
Hi Eric,

Thanks for the report on what sounded like a fruitful observing run.

Touring the globulars in Sagittarius and Scorpius is one of my favourite things.

You are fortunate to get some clear skies compared to the week of wet weather
here in Sydney. We are helping with sky tours on a large public observing
night this Saturday, but it is looking 50/50 weather-wise at the moment.
Reply With Quote
  #339  
Old 02-09-2011, 10:08 AM
vanwonky (Dave)
Registered User

vanwonky is offline
 
Join Date: May 2011
Location: Perth, Australia
Posts: 242
Argo Navis - Stellarium / SkySafari Push To

Firstly let me say that the AN is a fantastic bit of kit and has made my limited viewing hours a joy. Thanks to Gary for the fast response to queries and prompt delivery of the gear.

My question is about using the AN with either Stellarium or Skywatcher Pro in push to mode only on a MAC. I have had an admittedly 'quick' crack at both and it seems they both want to provide goto only. Has anybody had success with either for push to?

Cheers
Dave
Reply With Quote
  #340  
Old 02-09-2011, 05:44 PM
gary
Registered User

gary is offline
 
Join Date: Apr 2005
Location: Mt. Kuring-Gai
Posts: 5,996
Argo Navis and Stellarium

Quote:
Originally Posted by vanwonky View Post
Firstly let me say that the AN is a fantastic bit of kit and has made my limited viewing hours a joy. Thanks to Gary for the fast response to queries and prompt delivery of the gear.

My question is about using the AN with either Stellarium or Skywatcher Pro in push to mode only on a MAC. I have had an admittedly 'quick' crack at both and it seems they both want to provide goto only. Has anybody had success with either for push to?

Cheers
Dave
Hi Dave,

Thanks for your post and we appreciate your support.

With regards Stellarium, please see this web page which discusses
telescope compatibility -
http://www.stellarium.org/wiki/index..._Compatibility

It specifically mentions the Wildcard Innovations Argo Navis and
suggests you use the Meade LX-200 telescope control plugin.
If there is a dialog to set the Baud rate (speed of the
communications line, select 9600).

On the Argo Navis side, dial up MODE SETUP, SETUP SERIAL
and in the serial line of choice, set the BAUD to, say, 9600 and
the STARTUP to be 'meade'. Press EXIT to make sure the change
is committed to non-volatile memory. Then power the unit OFF and the
ON so the new STARTUP command starts.

I would expect you will then find Stellarium has the ability to
track where the scope is pointing. You should also be able to
issue a GOTO command on the Stellarium side in which case if you
dial up MODE CATALOG, FROM PLANETARIUM, the RA/Dec co-ordinates of
the object you have chose should appear and the GUIDE numbers
at the bottom will allow you to manually slew the scope to the target (i.e. PUSHTO).

Thanks again for the post.

Best Regards

Gary Kopff
Managing Director
Wildcard Innovations Pty. Ltd.
20 Kilmory Place, Mount Kuring-Gai
NSW. 2080. Australia
Phone +61-2-9457-9049
Fax +61-2-9457-9593
sales@wildcard-innovations.com.au
http://www.wildcard-innovations.com.au
Reply With Quote
Reply

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 10:40 AM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement