Go Back   IceInSpace > IceTrade Classifieds > IceTrade Archives

 
 
Thread Tools Rate Thread
  #1  
Old 09-01-2022, 03:40 PM
Galah (Patrick)
Registered User

Galah is offline
 
Join Date: Dec 2009
Location: Benalla
Posts: 54
Mitty Proline Wedge

Mitty Proline Wedge $275.00
Extremely solid and sturdy. There are two small tears on the tape that protects the plate (see image). Nothing that affects the use, functionality or longevity of the unit; not seen when the scope is fitted.

Comes with the plate that attaches to the CPC1100 Heavy Duty Tripod and to which the wedge is then attached. All attaching hardware and Allen keys included.

The Heavy Duty Tripod is not for sale and is used only to show the Plate and Wedge fitment.

Note that these items can be (and were) fitted to a 12" Pier Top Plate.

Reason for selling - have changed to an equatorial setup and the wedge is no longer required.

Can be collected at Benalla Victoria.

Shipping at buyers expense - this is a heavy unit (approx. 15kg).
Attached Thumbnails
Click for full-size image (Top view.jpg)
56.3 KB85 views
Click for full-size image (Plate fitted.jpg)
55.7 KB84 views
Click for full-size image (Ready for CPC.jpg)
117.8 KB103 views
Click for full-size image (Side View.jpg)
87.1 KB117 views
Click for full-size image (Rear view.jpg)
96.6 KB74 views
Click for full-size image (Fronal close up.jpg)
98.6 KB81 views
Click for full-size image (Hardware.jpg)
59.2 KB58 views

Last edited by sheeny; 25-01-2022 at 08:06 AM.
  #2  
Old 17-01-2022, 10:18 AM
Jauffray (Jacques)
Registered User

Jauffray is offline
 
Join Date: Feb 2021
Location: BUTLER
Posts: 0
Is it still for sale
Jac
  #3  
Old 19-01-2022, 06:02 PM
Galah (Patrick)
Registered User

Galah is offline
 
Join Date: Dec 2009
Location: Benalla
Posts: 54
Jac,
Yes it is.
Patrick
  #4  
Old 20-01-2022, 01:48 PM
Jauffray (Jacques)
Registered User

Jauffray is offline
 
Join Date: Feb 2021
Location: BUTLER
Posts: 0
Ok.Just put it pending.
Ring me on 0449668675
I will used it for a permanent on a pier installation.
Just has to find a solid fork now.
Cheers. J.F.Armand Auffray.
  #5  
Old 22-01-2022, 11:53 PM
Jauffray (Jacques)
Registered User

Jauffray is offline
 
Join Date: Feb 2021
Location: BUTLER
Posts: 0
Hi.
This is Jacques
I am waiting you to contact me.
0449668675
  #6  
Old 23-01-2022, 07:49 AM
Galah (Patrick)
Registered User

Galah is offline
 
Join Date: Dec 2009
Location: Benalla
Posts: 54
Jacques,
Called 0449668675 on Friday 21JAN - no answer.
Called Saturday and left a message.
Will call again Sunday around noon WA time.
Patrick.
  #7  
Old 24-01-2022, 08:12 PM
JoeCal (Joe)
Registered User

JoeCal is offline
 
Join Date: Nov 2021
Location: South Wentworthville
Posts: 0
Hi Patrick, Is this still available, Do you know if the plates will fit a 9.25, everything I have read suggests it will.

Joe 0402059826
  #8  
Old 25-01-2022, 08:23 AM
Galah (Patrick)
Registered User

Galah is offline
 
Join Date: Dec 2009
Location: Benalla
Posts: 54
Joe,
Thanks for responding. I have today requested that the item be marked as pending - for another user.
However, if this does not come to pass should I contact you?
As for fitting other mounts, need to know:
1) are there (up to) six equi-spaced threaded holes in the tripod top to accept the plate fasteners (there were six on my CPC1100 tripod) and what is the spacing?

2) what is the centre-to-centre spacing of the three mount attachment points,


OR alternatively are you sure that both size Celestron mounts fit the same Celestron tripod?


Regards,
Patrick.
  #9  
Old 25-01-2022, 08:34 PM
JoeCal (Joe)
Registered User

JoeCal is offline
 
Join Date: Nov 2021
Location: South Wentworthville
Posts: 0
Hi Patrick, please let me know if the other sale doesn't go ahead. I am fairly confident it will fit my mount so an=m happy to purchase if it is still available in a few days/ weeks. I am in no hurry but will be in Albury in March.

Joe
  #10  
Old 26-01-2022, 05:56 PM
Galah (Patrick)
Registered User

Galah is offline
 
Join Date: Dec 2009
Location: Benalla
Posts: 54
Joe,
Should know in a week or two. I will let you know.
Patrick.
  #11  
Old 18-02-2022, 03:23 PM
Galah (Patrick)
Registered User

Galah is offline
 
Join Date: Dec 2009
Location: Benalla
Posts: 54
Joe,
Wedge has been reset to available.
Patrick.
 

Bookmarks

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 07:39 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement
Testar
Advertisement