[SOLD] Focuser and Dew controller full set (inc stepper) $250

[elken2004 (Australia)]

MyFocuserPro2 and MyDewControllerPro3 3 channels fully controllable also can be run in full auto standalone too.

Focuser comes with all cables and temp probe to run to scope.
Dew controller comes with cables for the 3 channels and temp sensor cables, included is one temp sensor.
a temp/humidity sensor to measure temp and dewpoint cabled up.

i have included linksto the Pdf's so you can read all about the devices.
https://sourceforge.net/projects/ard...ocuserpro2diy/
https://sourceforge.net/projects/ard...controllerpro/

all thats required is a nema17pg5 (pg5 is the 5 to 1 ratio gearbox) bipolar stepper or similiar to mount on scope and of course the required dew straps

$400 plus postage

[elken2004 (Australia)]

I will add the nema14 pg5 stepper motor ready to go.
It was used on a skywatcher ed120, but can adapted to any other type too

[elken2004 (Australia)]

Price reduced to $300

[elken2004 (Australia)]

Final reduction, now $250
remember i have included the stepper motor assembly with it.

[Greg Bock (Greg Bock)]

PM'd