Eqmod Help!

Chris85 (Chris) · #1 22-09-2013, 11:39 AM

Hi all,

Just recently I've been having a few problems with Eqmod. Up until a few weeks ago it was working fine, but then it started crashing whenever I'd go to use it. Now it wont work at all, and when I try to, it just comes up with "Run-time error '62' Input past end of file", see pic below. I've done the usual uninstall, go through and delete everything, reinstall ect, but still nothing.
I'm running build V124 and Windows Vista 32bit.
Any tips would be much appreciated! Also I'm not completely useless, but if it starts getting to technical I might glaze over

Cheers!
Chris

Astroman (Andrew Wall) · #2 22-09-2013, 01:19 PM

Have you used the toolbox application for EQMOD and deleted the .ini files? deleting these files will allow EQMOD to create new ones and solves many errors that pop up from time to time. Just reinstalling will not delete these files.

Chris85 (Chris) · #3 22-09-2013, 01:45 PM

Thanks for the tip, Andrew.

I'll give that a shot and see what happens.
Chris

RobF (Rob) · #4 22-09-2013, 02:41 PM

Had the same problem on my 2nd laptop recently, and Andrew's advice was the fix alright

Chris85 (Chris) · #5 22-09-2013, 09:22 PM

Thanks guys, the advice was spot on! Just in time for yet another week of rain..
Cheers!
Chris

Astroman (Andrew Wall) · #6 22-09-2013, 09:31 PM

Great to hear it worked out Chris. 9 times out of 10 doing that will fix the problem. Have fun.

2stroke (Jay) · #7 23-09-2013, 04:26 PM

This is something that should be sticky'd lol i would be tearing my hair out on this and preying someone see my message on the yahoo group.

Astroman (Andrew Wall) · #8 23-09-2013, 06:10 PM

Yeah Jay, sometimes things do get over looked on there. More than happy to help out.. if I don't know the answer wont be too hard to shoot an email off to Chris who knows far more than me, only because he knows the inner workings of it... I only know what I use....

Chris85 (Chris) · #9 23-09-2013, 09:23 PM

Jay you have no idea how close I came to smashing my laptop into a million pieces! So frustrating. Made more so by the fact that I'm not the best when it come to pc's, but also I have very limited time with my hobbies, and so when something goes wrong during my rare chance of imaging it'll be weeks before I get a chance to fix or iron out bugs. I need things to be as plug'n'play as they can get!
IIS to the rescue once again :-D

Chris