Go Back   IceInSpace > IceTrade Classifieds > IceTrade Archives
Register FAQ Calendar Today's Posts Search

 
 
Thread Tools Rate Thread
  #1  
Old 29-03-2009, 11:23 PM
Shaun
Registered User

Shaun is offline
 
Join Date: Jun 2007
Location: Kellerberrin ,WA
Posts: 175
Wantedp-EQ mount with goto

I am looking for a mount to put my 8" dob tube on, i am not sure what size i would need i think an HEQ5 or higher i also need tube rings and mounting plate to fit.
  #2  
Old 01-04-2009, 10:33 PM
Shaun
Registered User

Shaun is offline
 
Join Date: Jun 2007
Location: Kellerberrin ,WA
Posts: 175
Bump
  #3  
Old 02-04-2009, 01:06 PM
Allan_L's Avatar
Allan_L (Allan)
Member > 10year club

Allan_L is offline
 
Join Date: Mar 2008
Location: Central Coast NSW
Posts: 3,339
SW EQ5 with Synscan goto

Hi Shaun,

This is probably of no use to you, but ...

I have a Skywatcher EQ5 (the more expensive one with the better stainless steel legs) which has subsequently been updated (by the supplier) with the Skywatcher Synscan Goto system.

The mount came with my skywatcher 8 inch newtonian (which I since sold separately). It handled that with ease.
Then I had a C9.25 on it and loaded with heavy motorised microfocuser and 2 inch diagonal and eyepiece. No problems.

I couldn't think why a DOB would be any heavier.
I read somewhere that this mount's rated payload is 10Kg and I would say that is conservative.

But pickup is from NSW Central Coast - sorry.

But, If you are over here on the Central Coast (to visit Mike or whatever) you could pick it up.

I do have all the original packaging, manuals, cables, etc. but I am not interested in posting it as it is too big for Aust Post. And the courier cost would reduce the attractiveness of my offer price IMHO.

The mount is availablr from Bintel at the moment at $599 new
The synscan upgrade is available (cheapest I found was telescope dot com dot au) on special (reduced from $1100???) at $849 new
(mine cost $1500 in total)
My setup is 13 months old (mount) and about 11 months old the goto.

I would be looking to sell it for just about the cost of the goto. Say $850

I have discussed with one other person who may be interested.

Anyone can PM me if interested

Cheers
Allan
  #4  
Old 02-04-2009, 01:30 PM
Shaun
Registered User

Shaun is offline
 
Join Date: Jun 2007
Location: Kellerberrin ,WA
Posts: 175
Unless you are willing to post i would be able to purchase it.
  #5  
Old 02-04-2009, 04:54 PM
Allan_L's Avatar
Allan_L (Allan)
Member > 10year club

Allan_L is offline
 
Join Date: Mar 2008
Location: Central Coast NSW
Posts: 3,339
Well, as I said, I have the original boxes and all packaging.

If you are interested I will measure and weigh them.

I have no problem preparing them for pick up, so long as you can arrange for a courier to pick them up from Central Coast or Newcastle.

Your call
  #6  
Old 02-04-2009, 05:16 PM
Shaun
Registered User

Shaun is offline
 
Join Date: Jun 2007
Location: Kellerberrin ,WA
Posts: 175
If you could do that i would check into picking up
  #7  
Old 03-04-2009, 07:16 AM
Allan_L's Avatar
Allan_L (Allan)
Member > 10year club

Allan_L is offline
 
Join Date: Mar 2008
Location: Central Coast NSW
Posts: 3,339
As discussed.
Package dimensions 105 x 49 x 27
Weight 27.2 kg.
Too big and too heavy for Aust Post.
But it is all packaged up sealed ready to go.

Pics as discussed
Attached Thumbnails
Click for full-size image (2009_0402EQ50033.JPG)
33.1 KB15 views
Click for full-size image (2009_0402EQ50037.JPG)
55.5 KB16 views
Click for full-size image (2009_0402EQ50038.JPG)
36.5 KB14 views
Click for full-size image (2009_0402EQ50041.JPG)
28.4 KB15 views
Click for full-size image (2009_0402EQ50047.JPG)
55.2 KB14 views
Click for full-size image (2009_0402EQ50050.JPG)
25.4 KB12 views
Click for full-size image (2009_0402EQ50052.JPG)
32.2 KB14 views
Click for full-size image (2009_0402EQ50061.JPG)
29.7 KB13 views

Last edited by Allan_L; 03-04-2009 at 12:50 PM. Reason: can't measure !
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT +10. The time is now 08:07 PM.

Powered by vBulletin Version 3.8.7 | Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Advertisement
Bintel
Advertisement