eta

[xcoupeb]

hello everyone, this was my first go with phd guiding the neq6. i took 3*5 minute exposures 800 iso on the 5d mk 2 through ed80 with reducer/flattener, then stacked with dss and processed in photoshop.
i know my processing skills need major work- i really just did a bit of this and a bit of that till i thought it looked half decent. i would appreciate comments on how i could process better and basically get it to look how it should. thanks

[Visionoz (Bill)]

Hi

There is an IIS member who had been presenting some Photoshop tutorials online off his website that might prove very useful for your purpose:
http://www.atalas.net (Look for the links around the bottom right hand corner) and here's all the links to those tutorials:
http://atalas.businesscatalyst.com/L...Photoshop.html
http://atalas.businesscatalyst.com/N...Photoshop.html
http://atalas.businesscatalyst.com/B...Photoshop.html
http://atalas.businesscatalyst.com/M...Photoshop.html
http://atalas.businesscatalyst.com/S...Photoshop.html
http://atalas.businesscatalyst.com/N...Photoshop.html
http://atalas.businesscatalyst.com/D...Photoshop.html
http://atalas.businesscatalyst.com/C...Photoshop.html

HTH
Cheers
Bill

[rcheshire (Rowland)]

There seems to be a lot of data there. It might be better to back off on the saturation. Much of the finer detail has been obliterated as a result. Go for detail rather than colour at this stage, then work on the saturation.

[midnight (Darrin)]

The 5D MkII is a wonderful instrument for low noise - allows you to get away with ISO800 where others can't.

Little too red. As suggested, check out Atalas' tutorials - they are fundamental if you're processing in PS.

Have a look - even if you don;t have PS, it gives you a good indication on processing.

Good luck and by the way, nice post too.

Darrin...