Jupiter 2015-03-10 & 11

[ags_ (Phil)]

Seeing was very good on the 10th with just over 1 hour of the GRS captured. Last night the seeing was ok but the easterly wind made life very difficult and I gave up as I was worried the scope may get blown off the pier. lol

[Shiraz (Ray)]

exquisite GRS image Phil

[Quark (Trevor)]

Certainly looks like nice data Phil, well done. Sounds like you need to house your scope in an observatory Phil, many times over the years the difference for me between getting data or not has been the protection given by my observatory.

[oernulfs (Ørnulf)]

Fantastic images, again

[Sebbie (Sebastian)]

Beautiful photos with the new ASI cam Phil! If I may ask what frame rate have you used to capture individual channels and how long each exposure was? I am quite impressed with updated specs although have noticed that the size of the chip is now larger (5.86 vs 3.75µm for the 120 model).

Rgds,
Sebastian

[Camelopardalis (Dunk)]

Stunning Phil, well done

[kkara4 (Krishan)]

very nice images Phil

[ags_ (Phil)]

Thanks all for your comments, I'm very happy with the new camera. Here are my Red settings via Firecapture:
FireCapture v2.4 Settings
------------------------------------
Camera=ZWO ASI174MM
Filter=R
Profile=Jupiter
Diameter=43.71"
Magnitude=-2.46
CMI=97.9° CMII=230.6° CMIII=150.3° (during mid of capture)
FocalLength=8000mm
Resolution=0.15"
Filename=2015-03-10-1226_2-R-6.ser
Date=20150310
Start=122615.566
Mid=122715.572
End=122815.578
Start(UT)=122615.566
Mid(UT)=122715.572
End(UT)=122815.578
Duration=120.012s
Date_format=yyyyMMdd
Time_format=HHmmss
LT=UT +10h
Frames captured=6644
File type=SER
Binning=no
Bit depth=16bit
ROI=480x480
ROI(Offset)=26x34
FPS (avg.)=55
Shutter=18.00ms
Gain=260
SoftwareGain=10 (off)
AutoExposure=off
USBTraffic=75
HighSpeed=off
Brightness=0
Gamma=50 (off)
Histogramm(min)=1
Histogramm(max)=2990
Histogramm=73%
Noise(avg.deviation)=n/a
Limit=120 Seconds
Sensor temperature=37.2 °C

[kkara4 (Krishan)]

Originally Posted by ags_

Thanks all for your comments, I'm very happy with the new camera. Here are my Red settings via Firecapture:
FireCapture v2.4 Settings
------------------------------------
Camera=ZWO ASI174MM
Filter=R
Profile=Jupiter
Diameter=43.71"
Magnitude=-2.46
CMI=97.9° CMII=230.6° CMIII=150.3° (during mid of capture)
FocalLength=8000mm
Resolution=0.15"
Filename=2015-03-10-1226_2-R-6.ser
Date=20150310
Start=122615.566
Mid=122715.572
End=122815.578
Start(UT)=122615.566
Mid(UT)=122715.572
End(UT)=122815.578
Duration=120.012s
Date_format=yyyyMMdd
Time_format=HHmmss
LT=UT +10h
Frames captured=6644
File type=SER
Binning=no
Bit depth=16bit
ROI=480x480
ROI(Offset)=26x34
FPS (avg.)=55
Shutter=18.00ms
Gain=260
SoftwareGain=10 (off)
AutoExposure=off
USBTraffic=75
HighSpeed=off
Brightness=0
Gamma=50 (off)
Histogramm(min)=1
Histogramm(max)=2990
Histogramm=73%
Noise(avg.deviation)=n/a
Limit=120 Seconds
Sensor temperature=37.2 °C

Thanks a lot for sharing your settings Phil, I have a few questions:

1) What does your gain slider allow you to set gain to maximum (is it around 900?)
2) 120 seconds for a single channel, are you derotating your AVI? I assume at 0.15 arcsec/pixel you would get rotational blurring after about 60 seconds from my conservative calcs - what are your experiences?
3) Why do you capture in SER instead of AVI?

TIA, and PM me if you prefer, cheers Phil!

[ags_ (Phil)]

Originally Posted by kkara4

Thanks a lot for sharing your settings Phil, I have a few questions:

1) What does your gain slider allow you to set gain to maximum (is it around 900?)
2) 120 seconds for a single channel, are you derotating your AVI? I assume at 0.15 arcsec/pixel you would get rotational blurring after about 60 seconds from my conservative calcs - what are your experiences?
3) Why do you capture in SER instead of AVI?

TIA, and PM me if you prefer, cheers Phil!

Max gain is 400 though anything above 240 is software and only allows you to see it better.
Yes there is some blurring at 120 seconds and & yes I usually de rotate, however I use Ninox at 50% then stack in Registax with a mild wavelet and most blurring is nr the limb where little if any detail is present.
I always use .ser as I believe it has less overhead and cleans up much faster. Ninox also produces a .ser when finished processing.
Nearly all my settings have been arrived at by close consultation with experts like Anthony Wesley I'm just tweaking them as I learn more.

Cheers, Phil

[kkara4 (Krishan)]

thanks Phil

[astronobob (Bob)]

Grouse imaging & extraordinary stuff Phil. Crypeeze a 43.7inch mirror Id be happy to just have a photo of that - if my humble 10-20mm would fit it in the frame