Those who were at SPSP15 will probably have heard that one of the split blocks on my scope has developed an unintended split. It is safe to continue using the scope, but Peter Read has generously agreed to replace ALL 8 split blocks without charge, with 39 ply marine ply blocks, all colour matched to the colour of the rest of the scope. Wow!
My big news is that while Peter is doing the split blocks, he is doing two other modifications for me:
1. He is putting in thicker truss poles (1.5 inches), which will give rock steady stability with the secondary cage; and
2. He is installing a safety bar which can lock the scope, whilst set up, at a 45 degree angle so I can safely wheel the scope in and out of my garage at the start and end of observing sessions. This will be a huge improvement because it should save me a good 30 minutes every observing session in setting up/ packing away time.
Peter is coming up from Shepparton VIC to collect the scope this coming Thursday, and will drop it back with all of the mods about 2 weeks later. Amazing service, yet again. I am very impressed.
BTW, here's a shot of me with the scope at SPSP (thanks HOughy for the happy snap). As you can see, I am feeling rather affectionate towards my new girl!
The safety bar/lock is a good idea...I've had a few struggles moving my scope "set-up".
I am not sure if I told you this, Scott, but I actually had an incident where the scope (fully set-up) fell out of the rocker box. Apparently this would happen much more when people move scope whilst set up, it is just that the servo-cat cables which most people have helps to hold the mirror box in position preventing this. For those of us without servo-cat (or those of us with servo-cat who don't want to damage the cabling) this is a very good invention.
I don't want to chance that sort of event happening again!
I'm glad that your telescope will be fixed and the service is fantastic.
Quote:
Originally Posted by Rodstar
I am not sure if I told you this, Scott, but I actually had an incident where the scope (fully set-up) fell out of the rocker box. Apparently this would happen much more when people move scope whilst set up, it is just that the servo-cat cables which most people have helps to hold the mirror box in position preventing this. For those of us without servo-cat (or those of us with servo-cat who don't want to damage the cabling) this is a very good invention.
I don't want to chance that sort of event happening again!
I had that same problem with the 18" every time I lifted the handles to move it until I started using the servocat. I noticed if you move the alt up high and then move the telescope it helps a bit. Although a locking device should always be used when moving an assembled telescope short distances.
I am not sure if I told you this, Scott, but I actually had an incident where the scope (fully set-up) fell out of the rocker box. Apparently this would happen much more when people move scope whilst set up, it is just that the servo-cat cables which most people have helps to hold the mirror box in position preventing this. For those of us without servo-cat (or those of us with servo-cat who don't want to damage the cabling) this is a very good invention.
I don't want to chance that sort of event happening again!
No, I had not heard about your experience...but the "struggles" that I quietly mentioned was exactly that kind of incident...although it did not come fully out of the rocker box (I caught it)...Maybe we should all start a club like AA...We could call it WWA (Wreckless Wheelers Anonymous) or something catchier
Peter has always been paranoid about the scope falling off the rocker, so he will be pleased you proved him right . I’ve been ok with mine both before and after ServoCAT – fingers crossed!
Peter has always been paranoid about the scope falling off the rocker, so he will be pleased you proved him right . I’ve been ok with mine both before and after ServoCAT – fingers crossed!
Jonathan, I know what you mean about Peter's concern......when he delivered the scope we discussed the issue and had a test run to manoevre it into the garage...we worked out a system that we thought was ok, backing it in to avoid the scope leaning down the slope towards the garage...Peter was obviously not too excited about the whole idea, though.
I was very lucky because the said incident occurred at a time when the lawn was due for a mow.....it softened the blow. I was just moving it into the garage, with my 8 year old holding it at a reasonable angle (about 45 degrees) as I manoevred it in, and suddenly it lurched out, snapped the encoder cables (which I then had to repair with a $50 crimping tool and some new cable and ends.....actually quite a worthwhile learning exercise). My heart my in my mouth as I checked the primary mirror, then to check whether any damage to the secondary cage or any warping in the poles. Fortunately, it passed inspection.
Anyway, Peter has obviously been pondering the whole thing since then, and I am very grateful that his concern would extend to making a device to address the problem. Talk about post-sales support!
Well, Peter Read collected my scope yesterday, and I am officially scopeless for two weeks. Back to some widefield observing with the ED80. Now that will make a rather interesting contrast.
Peter came over with Peter Brooks (SDM 009), we had a good old natter, and Peter R even fixed my wobbly toilet seat. Perhaps SDM should be renamed DSM ("Dunny Seat Maintenance").....thanks Peter.
Oh, and I just noticed looking out of the window this morning that suddenly the skies have cleared.....how predictable is that??!!
I was very lucky because the said incident occurred at a time when the lawn was due for a mow.....it softened the blow.
Rod,
Having observed your front lawn on many occasions and making a dangerous assumption that the back and front lawns are in equal "state of mow", I can tell you that scope would only be in danger about 1 week per year
Peter.
. I’ve been ok with mine both before and after ServoCAT – fingers crossed!
