Quote:
Originally Posted by RyanJones
Hi Martin,
I have an EAF on my rig. It comes with 4 different couplers, none of which fit the shaft on the GSO focuser. I drilled out the next size down to suit. They use a grub screw to pin to the shaft so if you just wind the grub out then drill it and then tighten up onto the shaft it works perfectly. The size does make it a little awkward to form a bracket to suit but it’s not impossible. Mine is bolted to the OTA next to the focuser body. I run mine through the ASIair too so despite having a hand controller for it, I’ve never used it.
Cheers
Ryan
|
Ryan,
Thanks for the first hand tip
I haven’t decided how I will mount it but at least I know can mount it from the OTA
Great advice !
Cheers
Martin