Quote:
Originally Posted by RyanJones
Hi Adam,
If you go into the EAF section in the AIR you can manually move your focuser all the way to its limit then there is a box that looks like a box with a pencil. Push that and you can tell it that that position is 60,000. Alternatively you can rack the focuser all the way in and tell the AIR that that position is 0. That would probably be my preference. Hope that helps
|
Hi Ryan
I'm on the right track then, thanks.
I'd set the 0 point with the focuser all the way in, then went out until it couldn't go any further. That turned out be about 19,500.
Went back to the zero point, and set the Max Step Limit to 19,000.
So I should be able to focus anywhere in between those points.
Cheers!
Adam