Quote:
Originally Posted by NSpillars
one of the usb ports on the advance should supply sufficient power its designed to supply 3a at 5v to the pi3/4
|
He needs to use one of the 12v outputs.
One of these:
https://www.altronics.com.au/p/p6731...mm-dc-adapter/
And one of these:
https://www.jaycar.com.au/2-1mm-dc-p...aptor/p/PA3707
Would get it done easily.
Better would be cutting the original cable and adding one of these(no soldering):
https://www.jaycar.com.au/2-1mm-dc-p...inals/p/PA3711
Better still, soldering one of these and heat-shrinking some strain-relief:
https://www.jaycar.com.au/2-1mm-dc-p...ector/p/PP0510