|
I have no idea, if you would like some measurements please ask and I will run the ruler over it. I think they are similar size scopes so there is a good chance, butbyou would need to compare the spacing of the holes in the bottom to see. With the C8 you put one bolt into the bottom of the scope and then lift it on and it went into the slot at the top of the wedge. You then put in two more bolts and tightened it all up. The three bolts form a triangle on the base of the scope. I think this is a fairly standard arrangement so you would just need to measure the distance between the hole centres.
The face that the scope bolts onto is basically circlular so measure the diameter of the base of your scope.
I'll run the tape measure over it this evening and post the measurements.
Last edited by rogerco; 04-02-2013 at 12:03 PM.
Reason: Spelling mistakes
|